- 密度 [g/cm3]: 1.82
- 彎曲模量 [MPa]: 12.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.700 - 0.850 g/cc | 0.0253 - 0.0307 lb/in3 | Powder Density; ISO 60 | ||
| Density | 1.82 g/cc | 0.0658 lb/in3 | Relative Density; ISO 1183 | ||
| Linear Mold Shrinkage | 0.0020 - 0.0030 cm/cm | 0.0020 - 0.0030 in/in | Injection Molding; ISO 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 50.0 - 70.0 MPa | 7250 - 10200 psi | ISO 527 | ||
| Elongation at Break | 0.30 - 0.40 % | 0.30 - 0.40 % | Tensile; ISO 527 | ||
| 0.90 - 1.0 % | 0.90 - 1.0 % | Flexure; ISO 178 | |||
| Tensile Modulus | 17.5 - 19.5 GPa | 2540 - 2830 ksi | ISO 527 | ||
| Flexural Strength | 95.0 - 115 MPa | 13800 - 16700 psi | At Rupture; ISO 178 | ||
| Flexural Modulus | 12.0 - 14.0 GPa | 1740 - 2030 ksi | ISO 178 | ||
| Compressive Strength | 180 - 220 MPa | 26100 - 31900 psi | ISO 604 | ||
| Charpy Impact Unnotched | 0.900 - 1.10 J/cm2 | 4.28 - 5.24 ft-lb/in2 | ISO 179 | ||
| Charpy Impact, Notched | 0.350 - 0.550 J/cm2 | 1.67 - 2.62 ft-lb/in2 | ISO 179 | ||
| Electrical Properties | Metric | English | Comments | ||
| Insulation Resistance | 1.00e+12 - 1.00e+13 ohm | 1.00e+12 - 1.00e+13 ohm | Dry; IEC 167 | ||
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 243 | ||
| Comparative Tracking Index | 200 V | 200 V | IEC 112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 - 30.0 μm/m-°C @Temperature 20.0 °C | 11.1 - 16.7 μin/in-°F @Temperature 68.0 °F | |||
| CTE, linear, Transverse to Flow | 25.0 - 35.0 μm/m-°C @Temperature 20.0 °C | 13.9 - 19.4 μin/in-°F @Temperature 68.0 °F | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 200 - 220 °C | 392 - 428 °F | ISO 75 A | ||
| Deflection Temperature at 8.0 MPa | 165 - 185 °C | 329 - 365 °F | ISO 75 C | ||
| Flammability, UL94 | V-1 @Thickness 1.60 mm | V-1 @Thickness 0.0630 in | |||
| V-0 @Thickness 4.00 mm | V-0 @Thickness 0.157 in | ||||
| Shrinkage | 0.050 - 0.15 % | 0.050 - 0.15 % | Post Shrinkage; ISO 2577 | ||
| Descriptive Properties | |||||
| Color | Black | ||||
| ISO type | PF 2 C3 | ||||
| Main Filler | Glass Fiber & Mineral | ||||
| Molding Method | Compression, transfer, injection | ||||