• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 5145L WT010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 5145L WT010 LCP
        
                
        Celanese Zenite? 5145L WT010 LCP 物性表: Celanese Zenite? 5145L WT010 LCP物性表及特性介紹,Celanese Zenite? 5145L WT010 LCP注塑參數詳情,如需Celanese Zenite? 5145L WT010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.77
          • 
                                
                                
        • 缺口沖擊強度: 2.5
          • 
                                
                                
        • 彎曲強度 [MPa]: 130.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 10.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.76 g/cc1.76 g/ccASTM D 792
        

        Density 1.77 g/cc0.0639 lb/in3ISO 1183
        

        Filler Content 45 %45 %
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 115 MPa16700 psiISO 527
        

        Tensile Strength, Ultimate 130 MPa
        @Temperature 23.0 °C        		18900 psi
        @Temperature 73.4 °F        		ASTM D 638
        

        Elongation at Break 3.3 %3.3 %ISO 527
        

          3.3 %
        @Temperature 23.0 °C        		3.3 %
        @Temperature 73.4 °F        		ASTM D 638
        

        Tensile Modulus 13.0 GPa
        @Temperature 23.0 °C        		1890 ksi
        @Temperature 73.4 °F        		ISO 527
        

        Flexural Strength  160 MPa
        @Temperature 23.0 °C        		23200 psi
        @Temperature 73.4 °F        		ASTM D 790
        

         180 MPa
        @Temperature 23.0 °C        		26100 psi
        @Temperature 73.4 °F        		ISO 178
        

        Flexural Modulus  10.0 GPa
        @Temperature 23.0 °C        		1450 ksi
        @Temperature 73.4 °F        		ISO 178
        

         13.0 GPa
        @Temperature 23.0 °C        		1890 ksi
        @Temperature 73.4 °F        		ASTM D 790
        

        Izod Impact, Notched 2.50 J/cm
        @Temperature 23.0 °C        		4.68 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 256
        

        Izod Impact, Unnotched 5.00 J/cm
        @Temperature 23.0 °C        		9.37 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 4812
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmASTM D 257
        

        Surface Resistance 1.00e+15 ohm1.00e+15 ohmASTM D 257
        

        Dielectric Constant  3.4
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.4
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         3.9
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         4.4
        @Frequency 100000 Hz,
         Temperature 23.0 °C        		4.4
        @Frequency 100000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         4.5
        @Frequency 10000 Hz,
         Temperature 23.0 °C        		4.5
        @Frequency 10000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

        Dielectric Strength 22.0 kV/mm
        @Temperature 23.0 °C        		559 kV/in
        @Temperature 73.4 °F        		500 V/s, Short Time; ASTM D 149
        

        Dissipation Factor  0.014
        @Frequency 10000 Hz        		0.014
        @Frequency 10000 Hz        		ASTM D 150
        

         0.017
        @Frequency 1000 Hz        		0.017
        @Frequency 1000 Hz        		ASTM D 150
        

         0.018
        @Frequency 100000 Hz        		0.018
        @Frequency 100000 Hz        		ASTM D 150
        

         0.018
        @Frequency 1.00e+6 Hz        		0.018
        @Frequency 1.00e+6 Hz        		ASTM D 150
        

        Comparative Tracking Index 150 V150 VIEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  -1.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		-0.556 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         0.000 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		0.000 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		3.33 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         7.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		3.89 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  52.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         52.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         77.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		42.8 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         80.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		44.4 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          60.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         60.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         80.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		44.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         80.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		44.4 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         95.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		52.8 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         100 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		55.6 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Melting Point 319 °C606 °F10°C/min; ISO 11357-1/-3
        

        Deflection Temperature at 1.8 MPa (264 psi) 275 °C527 °FASTM D 648
        

         290 °C554 °FISO 75-1/-2 1993/N2
        

        UL RTI, Electrical 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        UL RTI, Mechanical with Impact 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        UL RTI, Mechanical without Impact 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 0.800 mm        		V-0
        @Thickness 0.0315 in        		IEC 60695-11-10
        

         V-0
        @Thickness 0.800 mm        		V-0
        @Thickness 0.0315 in        		UL94
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		IEC 60695-11-10
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 335 °C635 °FOptimum
        

         325 - 345 °C617 - 653 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorWhite
        Drying RecommendedYes
        FillerGlass Reinforced
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-GF45<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Flame Retardant Resins
         Glass Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-GF45ISO 1043
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31763.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 5145L WT010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
免费人成视频x8x8国产|
综合色区亚洲熟女妇p|
久章草这里只有精品|
亚洲精品中文字幕二区|
精品亚洲国产成人蜜臀av|
久久久婷婷综合亚洲av|
午夜性又黄又爽免费看尤物
|
日本一卡二卡3卡四卡网站精品|
亚洲AⅤ精品一区二区三区|
精品福利国产|
国产中文99视频在线观看|
99久久亚洲综合网精品|
日韩一区二区三在线观看|
精品亚洲女同一区二区|
欧洲免费一区二区三区视频|
97午夜理论电影影院|
少女韩国在线观看完整版免费|
北岛玲中文字幕人妻系列|
最近中文字幕完整国语|
国产公开久久人人97超碰|
色窝窝免费一区二区三区|
亚洲欧美日韩在线不卡|
久久香蕉国产亚洲av麻豆|
国产精品中文字幕免费|
国产午夜精品一区理论片|
国产三级精品三级在线专区1|
亚洲av无码牛牛影视在线二区
|
久久久久人妻精品一区三寸|
久久精品激情亚洲一二区|
少妇人妻偷人免费观看|
亚洲欧美日产综合在线网|
日本高清一区二区不卡视频|
精品国产一区二区三区四区五区
|
天堂网www在线|
欧美国产精品拍自|
中文精品无码中文字幕无码专区|
欧洲码亚洲码的区别入口|
九九热在线精品视频观看|
中文字幕日韩精品人妻|
欧美午夜理伦三级在线观看|
波多野结衣久久一区二区|