• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 6330 BK010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 6330 BK010 LCP
        
                
        Celanese Zenite? 6330 BK010 LCP 物性表: Celanese Zenite? 6330 BK010 LCP物性表及特性介紹,Celanese Zenite? 6330 BK010 LCP注塑參數詳情,如需Celanese Zenite? 6330 BK010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.64
          • 
                                
                                
        • 缺口沖擊強度: 1.6
          • 
                                
                                
        • 彎曲強度 [MPa]: 17.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 8.00
          • 
                                
                                
        • 熱變形溫度 [℃]: 275.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.64 g/cc1.64 g/ccASTM D 792
        

        Density 1.64 g/cc0.0592 lb/in3ISO 1183
        

        Filler Content 30 %30 %
        

        Linear Mold Shrinkage, Flow  0.00 cm/cm
        @Thickness 3.17 mm        		0.00 in/in
        @Thickness 0.125 in        		ASTM D955
        

         0.00 cm/cm
        @Thickness 2.00 mm        		0.00 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

        Linear Mold Shrinkage, Transverse  0.0040 cm/cm
        @Thickness 2.00 mm        		0.0040 in/in
        @Thickness 0.0787 in        		ISO 294-4
        

         0.0050 cm/cm
        @Thickness 3.17 mm        		0.0050 in/in
        @Thickness 0.125 in        		ASTM D955
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 125 MPa18100 psiISO 527
        

        Tensile Strength, Ultimate  17.0 MPa
        @Thickness 1.60 mm,
         Temperature 250 °C        		2470 psi
        @Thickness 0.0630 in,
         Temperature 482 °F        		ASTM D638
        

         26.0 MPa
        @Thickness 1.60 mm,
         Temperature 200 °C        		3770 psi
        @Thickness 0.0630 in,
         Temperature 392 °F        		ASTM D638
        

         48.0 MPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		6960 psi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D638
        

         49.0 MPa
        @Thickness 1.60 mm,
         Temperature 150 °C        		7110 psi
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D638
        

         56.0 MPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		8120 psi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D638
        

         59.0 MPa
        @Thickness 1.60 mm,
         Temperature 120 °C        		8560 psi
        @Thickness 0.0630 in,
         Temperature 248 °F        		ASTM D638
        

         125 MPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		18100 psi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

         141 MPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		20500 psi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         200 MPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		29000 psi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D638
        

         216 MPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		31300 psi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D638
        

        Elongation at Break 4.2 %4.2 %ISO 527
        

          0.70 %
        @Thickness 1.60 mm,
         Temperature 250 °C        		0.70 %
        @Thickness 0.0630 in,
         Temperature 482 °F        		ASTM D638
        

         0.90 %
        @Thickness 1.60 mm,
         Temperature 200 °C        		0.90 %
        @Thickness 0.0630 in,
         Temperature 392 °F        		ASTM D638
        

         1.5 %
        @Thickness 1.60 mm,
         Temperature 150 °C        		1.5 %
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D638
        

         2.0 %
        @Thickness 1.60 mm,
         Temperature 120 °C        		2.0 %
        @Thickness 0.0630 in,
         Temperature 248 °F        		ASTM D638
        

         2.5 %
        @Thickness 3.17 mm,
         Temperature 150 °C        		2.5 %
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D638
        

         2.8 %
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		2.8 %
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D638
        

         3.2 %
        @Thickness 3.17 mm,
         Temperature 120 °C        		3.2 %
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D638
        

         3.3 %
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		3.3 %
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         4.0 %
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		4.0 %
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

        Tensile Modulus 9.20 GPa
        @Temperature 23.0 °C        		1330 ksi
        @Temperature 73.4 °F        		ISO 527
        

          2.77 GPa
        @Thickness 1.60 mm,
         Temperature 250 °C        		402 ksi
        @Thickness 0.0630 in,
         Temperature 482 °F        		ASTM D638
        

         3.75 GPa
        @Thickness 1.60 mm,
         Temperature 200 °C        		544 ksi
        @Thickness 0.0630 in,
         Temperature 392 °F        		ASTM D638
        

         4.80 GPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		696 ksi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D638
        

         5.80 GPa
        @Thickness 1.60 mm,
         Temperature 150 °C        		841 ksi
        @Thickness 0.0630 in,
         Temperature 302 °F        		ASTM D638
        

         6.15 GPa
        @Thickness 1.60 mm,
         Temperature 120 °C        		892 ksi
        @Thickness 0.0630 in,
         Temperature 248 °F        		ASTM D638
        

         10.5 GPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		1520 ksi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D638
        

         11.6 GPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		1680 ksi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D638
        

         11.6 GPa
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		1680 ksi
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		ASTM D638
        

         16.5 GPa
        @Thickness 1.60 mm,
         Temperature -40.0 °C        		2390 ksi
        @Thickness 0.0630 in,
         Temperature -40.0 °F        		ASTM D638
        

        Flexural Strength 145 MPa
        @Temperature 23.0 °C        		21000 psi
        @Temperature 73.4 °F        		ISO 178
        

          42.0 MPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		6090 psi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D790
        

         50.0 MPa
        @Thickness 0.800 mm,
         Temperature 150 °C        		7250 psi
        @Thickness 0.0315 in,
         Temperature 302 °F        		ASTM D790
        

         51.0 MPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		7400 psi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D790
        

         60.0 MPa
        @Thickness 0.800 mm,
         Temperature 120 °C        		8700 psi
        @Thickness 0.0315 in,
         Temperature 248 °F        		ASTM D790
        

         125 MPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		18100 psi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D790
        

         158 MPa
        @Thickness 0.800 mm,
         Temperature 23.0 °C        		22900 psi
        @Thickness 0.0315 in,
         Temperature 73.4 °F        		ASTM D790
        

         192 MPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		27800 psi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D790
        

         260 MPa
        @Thickness 0.800 mm,
         Temperature -40.0 °C        		37700 psi
        @Thickness 0.0315 in,
         Temperature -40.0 °F        		ASTM D790
        

        Flexural Modulus 8.00 GPa
        @Temperature 23.0 °C        		1160 ksi
        @Temperature 73.4 °F        		ISO 178
        

          3.30 GPa
        @Thickness 3.17 mm,
         Temperature 150 °C        		479 ksi
        @Thickness 0.125 in,
         Temperature 302 °F        		ASTM D790
        

         3.40 GPa
        @Thickness 3.17 mm,
         Temperature 120 °C        		493 ksi
        @Thickness 0.125 in,
         Temperature 248 °F        		ASTM D790
        

         5.00 GPa
        @Thickness 0.800 mm,
         Temperature 150 °C        		725 ksi
        @Thickness 0.0315 in,
         Temperature 302 °F        		ASTM D790
        

         5.16 GPa
        @Thickness 0.800 mm,
         Temperature 120 °C        		748 ksi
        @Thickness 0.0315 in,
         Temperature 248 °F        		ASTM D790
        

         9.60 GPa
        @Thickness 3.17 mm,
         Temperature 23.0 °C        		1390 ksi
        @Thickness 0.125 in,
         Temperature 73.4 °F        		ASTM D790
        

         10.7 GPa
        @Thickness 3.17 mm,
         Temperature -40.0 °C        		1550 ksi
        @Thickness 0.125 in,
         Temperature -40.0 °F        		ASTM D790
        

         13.9 GPa
        @Thickness 0.800 mm,
         Temperature 23.0 °C        		2020 ksi
        @Thickness 0.0315 in,
         Temperature 73.4 °F        		ASTM D790
        

         16.7 GPa
        @Thickness 0.800 mm,
         Temperature -40.0 °C        		2420 ksi
        @Thickness 0.0315 in,
         Temperature -40.0 °F        		ASTM D790
        

        Izod Impact, Notched 1.60 J/cm
        @Temperature 23.0 °C        		3.00 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 256
        

        Charpy Impact Unnotched  4.00 J/cm2
        @Temperature -30.0 °C        		19.0 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         6.00 J/cm2
        @Temperature 23.0 °C        		28.6 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  0.700 J/cm2
        @Temperature -30.0 °C        		3.33 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         0.900 J/cm2
        @Temperature 23.0 °C        		4.28 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity >= 1.00e+15 ohm-cm>= 1.00e+15 ohm-cmIEC 60093
        

         1.00e+16 ohm-cm1.00e+16 ohm-cmIEC 60093
        

         >= 1.00e+16 ohm-cm>= 1.00e+16 ohm-cmASTM D 257
        

        Surface Resistance >= 1.00e+15 ohm>= 1.00e+15 ohmIEC 60093
        

         1.00e+16 ohm1.00e+16 ohmIEC 60093
        

         >= 1.00e+16 ohm>= 1.00e+16 ohmASTM D 257
        

        Dielectric Constant 3.8
        @Frequency 100 Hz        		3.8
        @Frequency 100 Hz        		IEC 60250
        

          2.9
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		2.9
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         3.2
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.2
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         3.3
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.3
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         3.3
        @Frequency 100 Hz,
         Temperature 23.0 °C        		3.3
        @Frequency 100 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         3.4
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.4
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         3.6
        @Frequency 100 Hz,
         Temperature 23.0 °C        		3.6
        @Frequency 100 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         3.6
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.6
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         3.9
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         3.9
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         3.9
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		4.0
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		4.0
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		4.0
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 150 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 302 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 150 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 302 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+9 Hz,
         Temperature 150 °C        		4.0
        @Frequency 1.00e+9 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.0
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		4.0
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+9 Hz,
         Temperature 200 °C        		4.1
        @Frequency 1.00e+9 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+9 Hz,
         Temperature 200 °C        		4.1
        @Frequency 1.00e+9 Hz,
         Temperature 392 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.1
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		4.1
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         4.2
        @Frequency 1.00e+9 Hz,
         Temperature 250 °C        		4.2
        @Frequency 1.00e+9 Hz,
         Temperature 482 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         4.2
        @Frequency 1.00e+9 Hz,
         Temperature 200 °C        		4.2
        @Frequency 1.00e+9 Hz,
         Temperature 392 °F        		0.8mm (0.031in); ASTM D 2520 B
        

        Dielectric Strength  26.0 kV/mm
        @Thickness 2.00 mm        		660 kV/in
        @Thickness 0.0787 in        		IEC 60243-1
        

         35.0 kV/mm
        @Thickness 1.00 mm        		889 kV/in
        @Thickness 0.0394 in        		IEC 60243-1
        

          26.0 kV/mm
        @Thickness 3.20 mm,
         Temperature 23.0 °C        		660 kV/in
        @Thickness 0.126 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

         41.0 kV/mm
        @Thickness 1.60 mm,
         Temperature 23.0 °C        		1040 kV/in
        @Thickness 0.0630 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

         49.0 kV/mm
        @Thickness 0.800 mm,
         Temperature 23.0 °C        		1240 kV/in
        @Thickness 0.0315 in,
         Temperature 73.4 °F        		Short time; ASTM D149
        

        Dissipation Factor  0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		0.0010
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		0.0020
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.0050
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		0.0050
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.0060
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		0.0060
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.0060
        @Frequency 1.00e+10 Hz,
         Temperature 120 °C        		0.0060
        @Frequency 1.00e+10 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.0080
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.0080
        @Frequency 100 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.0090
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.0090
        @Frequency 100 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 150 °C        		0.0090
        @Frequency 1.00e+10 Hz,
         Temperature 302 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.012
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		0.012
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.013
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.013
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         0.013
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		0.013
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.014
        @Frequency 100 Hz,
         Temperature 23.0 °C        		0.014
        @Frequency 100 Hz,
         Temperature 73.4 °F        		IEC 60250
        

         0.014
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		0.014
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.014
        @Frequency 1.00e+9 Hz,
         Temperature 120 °C        		0.014
        @Frequency 1.00e+9 Hz,
         Temperature 248 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.015
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		0.015
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.017
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		0.017
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.018
        @Frequency 1.00e+10 Hz,
         Temperature 200 °C        		0.018
        @Frequency 1.00e+10 Hz,
         Temperature 392 °F        		1.6mm (0.062in); ASTM D 2520 B
        

         0.018
        @Frequency 1.00e+9 Hz,
         Temperature 150 °C        		0.018
        @Frequency 1.00e+9 Hz,
         Temperature 302 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.020
        @Frequency 1.00e+9 Hz,
         Temperature 150 °C        		0.020
        @Frequency 1.00e+9 Hz,
         Temperature 302 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.026
        @Frequency 1.00e+9 Hz,
         Temperature 250 °C        		0.026
        @Frequency 1.00e+9 Hz,
         Temperature 482 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.027
        @Frequency 1.00e+9 Hz,
         Temperature 200 °C        		0.027
        @Frequency 1.00e+9 Hz,
         Temperature 392 °F        		0.8mm (0.031in); ASTM D 2520 B
        

         0.028
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.028
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		3.2mm (0.125in); ASTM D 150
        

         0.029
        @Frequency 1.00e+9 Hz,
         Temperature 200 °C        		0.029
        @Frequency 1.00e+9 Hz,
         Temperature 392 °F        		3.2mm (0.125in); ASTM D 2520 B
        

         0.029
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.029
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		0.8mm (0.031in); ASTM D 150
        

         0.031
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		0.031
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		IEC 60250
        

        Comparative Tracking Index 200 V200 VIEC 60112
        

         175 - 249 V175 - 249 VUL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear 8.00 μm/m-°C
        @Temperature 23.0 - 150 °C        		4.44 μin/in-°F
        @Temperature 73.4 - 302 °F        		ASTM E 228
        

          -4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		-2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		2.78 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		2.78 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         7.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		3.89 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         8.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		4.44 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         10.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		5.56 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         10.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		5.56 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         10.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		5.56 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  22.0 μm/m-°C
        @Temperature 23.0 - 150 °C        		12.2 μin/in-°F
        @Temperature 73.4 - 302 °F        		ASTM E 228
        

         34.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		18.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         34.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		18.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         37.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		20.6 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         50.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		27.8 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          38.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		21.1 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         40.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		22.2 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         44.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		24.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         46.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		25.6 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         51.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		28.3 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         62.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		34.4 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Melting Point 335 °C635 °F10°C/min; ISO 11357-1/-3
        

        Deflection Temperature at 0.46 MPa (66 psi) 275 °C527 °FISO 75-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 239 °C462 °FASTM D 648
        

         245 °C473 °FISO 75-1/-2
        

        Glass Transition Temp, Tg 120 °C248 °F10°C/min; ISO 11357-1/-2
        

         120 °C248 °FASTM D 3418
        

        UL RTI, Electrical  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical with Impact  220 °C
        @Thickness 1.50 mm        		428 °F
        @Thickness 0.0591 in        		UL 746B
        

         220 °C
        @Thickness 3.00 mm        		428 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical without Impact  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		IEC 60695-11-10
        

        Oxygen Index 47 %47 %ISO 4589-1/-2
        

        Glow Wire Test  850 °C
        @Thickness 2.00 mm        		1560 °F
        @Thickness 0.0787 in        		Glow Wire Ignition Temperature; IEC 60695-2-13
        

         875 °C
        @Thickness 3.00 mm        		1610 °F
        @Thickness 0.118 in        		Glow Wire Ignition Temperature; IEC 60695-2-13
        

         960 °C
        @Thickness 2.00 mm        		1760 °F
        @Thickness 0.0787 in        		Glow Wire Flammability Index; IEC 60695-2-12
        

         960 °C
        @Thickness 3.00 mm        		1760 °F
        @Thickness 0.118 in        		Glow Wire Flammability Index; IEC 60695-2-12
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 355 °C671 °FOptimum
        

         350 - 360 °C662 - 680 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorBlack
        Drying RecommendedYes
        FeaturesAppearance, Pleasing Surface
         Arc Resistant
         Aromatic
         Chemical Resistance, Good
         Dimensional Stability, Good
         Flow, Good
         Heat Aging Resistance, Good
         Moisture Absorption, Low
         Platable
         Warpage, Low
        FillerMineral filler
        Flame Retardant - Halogen/Red Phosphorus FreeYes
        FormsPellets
        GenericLCP
        Mineral FillerYes
        Part Marking Code>LCP-MD30<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        ProcessingInjection Moldable
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Flame Retardant Resins
         Low Warp Resins
         Mineral Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-MD30ISO 1043
        UsesAutomotive Applications
         Automotive Electronics
         Automotive, Under the Hood
         Communication Applications
         Computer Components
         Connectors
         Electrical/Electronic Applications
         Parts, Engineering
         Parts, Thin-walled
         Printer Parts
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31760.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 6330 BK010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
精品国产精品中文字幕|
国产成人做受免费视频|
欲乱人妻少妇邻居毛片|
亚洲一区久久蜜臀av|
亚洲偷自拍国综合|
亚洲人妻精品中文字幕|
亚洲熟女精品一区二区|
无码人妻一区二区三区四区AV|
亚洲国模精品一区二区|
久久精品道一区二区三区|
亚洲精品一二三伦理中文|
欧美三级欧美成人高清|
亚洲精品中文字幕无乱码|
国产精品高潮呻吟av久久无吗|
精品国产精品国产偷麻豆|
国产精品久久毛片|
99视频精品全部免费 在线|
精品久久久久久无码中文字幕|
国产精品自在线拍国产手青青机版|
99精品国产中文字幕|
中文字幕在线国产精品|
人妻一区二区三区人妻黄色|
欧美熟妇xxxxx欧美老妇不卡|
欧美牲交a欧美牲交aⅴ免费真|
五月婷婷久久草|
97视频精品全国免费观看|
亚洲国产aⅴ综合网|
老外女人毛黑p大|
亚洲熟妇自偷自拍另欧美|
AV国内高清啪啪|
日本欧美大码a在线观看|
99久久机热/这里只有精品|
亚洲AV日韩AV激情亚洲|
四虎影视www在线播放|
久久久久四虎精品免费入口|
日本亚洲欧洲无免费码在线
|
奶头好大揉着好爽视频|
国产无遮挡又黄又爽不要vip软件
国产成人精品一区二区秒拍1o
|
日韩精品国产二区三区|
亚洲天堂欧洲|
国产精品分类视频分类一区|