• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 6140L WT010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 6140L WT010 LCP
        
                
        Celanese Zenite? 6140L WT010 LCP 物性表: Celanese Zenite? 6140L WT010 LCP物性表及特性介紹,Celanese Zenite? 6140L WT010 LCP注塑參數詳情,如需Celanese Zenite? 6140L WT010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.77
          • 
                                
                                
        • 缺口沖擊強度: 10.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 14.5
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.77 g/cc0.0639 lb/in3ISO 1183
        

        Filler Content 40 %40 %
        

        Linear Mold Shrinkage, Flow 0.00050 cm/cm
        @Thickness 2.00 mm        		0.00050 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0050 cm/cm
        @Thickness 2.00 mm        		0.0050 in/in
        @Thickness 0.0787 in        		ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 125 MPa18100 psiISO 527
        

        Elongation at Break 1.3 %1.3 %ISO 527
        

        Tensile Modulus 17.3 GPa
        @Temperature 23.0 °C        		2510 ksi
        @Temperature 73.4 °F        		ISO 527
        

        Flexural Strength 200 MPa
        @Temperature 23.0 °C        		29000 psi
        @Temperature 73.4 °F        		ISO 178
        

        Flexural Modulus 14.5 GPa
        @Temperature 23.0 °C        		2100 ksi
        @Temperature 73.4 °F        		ISO 178
        

        Izod Impact, Notched (ISO) 10.0 kJ/m2
        @Temperature 23.0 °C        		4.76 ft-lb/in2
        @Temperature 73.4 °F        		ISO 180/1A
        

        Izod Impact, Unnotched (ISO)  20.0 kJ/m2
        @Temperature -30.0 °C        		9.52 ft-lb/in2
        @Temperature -22.0 °F        		ISO 180/1U
        

         20.0 kJ/m2
        @Temperature 23.0 °C        		9.52 ft-lb/in2
        @Temperature 73.4 °F        		ISO 180/1U
        

        Charpy Impact Unnotched  1.80 J/cm2
        @Temperature -30.0 °C        		8.57 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eU
        

         2.00 J/cm2
        @Temperature 23.0 °C        		9.52 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eU
        

        Charpy Impact, Notched  1.40 J/cm2
        @Temperature 23.0 °C        		6.66 ft-lb/in2
        @Temperature 73.4 °F        		ISO 179/1eA
        

         1.50 J/cm2
        @Temperature -30.0 °C        		7.14 ft-lb/in2
        @Temperature -22.0 °F        		ISO 179/1eA
        

         
        Electrical PropertiesMetricEnglishComments
        Comparative Tracking Index 175 - 249 V175 - 249 VUL 746A
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  0.000 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		0.000 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         2.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		1.11 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		1.67 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  55.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		30.6 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         56.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		31.1 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         77.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		42.8 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         79.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		43.9 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          62.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		34.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         64.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		35.6 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         80.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		44.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         82.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		45.6 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         90.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		50.0 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         94.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		52.2 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Melting Point 335 °C635 °F10°C/min; ISO 11357-1/-3
        

        Deflection Temperature at 1.8 MPa (264 psi) 280 °C536 °FISO 75-1/-2
        

        UL RTI, Electrical  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical with Impact  220 °C
        @Thickness 1.50 mm        		428 °F
        @Thickness 0.0591 in        		UL 746B
        

         220 °C
        @Thickness 3.00 mm        		428 °F
        @Thickness 0.118 in        		UL 746B
        

        UL RTI, Mechanical without Impact  240 °C
        @Thickness 1.50 mm        		464 °F
        @Thickness 0.0591 in        		UL 746B
        

         240 °C
        @Thickness 3.00 mm        		464 °F
        @Thickness 0.118 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		IEC 60695-11-10
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		UL94
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 355 °C671 °FOptimum
        

         350 - 360 °C662 - 680 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorWhite
        Drying RecommendedYes
        FillerGlass Reinforced
        Flame Retardant - Halogen/Red Phosphorus FreeYes
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-GF40<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        ProcessingInjection Moldable
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Electrical Resins
         Flame Retardant Resins
         Flame Retardant Resins
         Glass Reinforced Resins
         Glass Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-GF40ISO 1043
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31756.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 6140L WT010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
97在线观看视频免费|
精品国产亚洲午夜精品av|
日韩精品一区二区三区中文无码|
精品无码人妻一区二区三区|
狠狠做五月深爱婷婷天天综合
|
无码免费大香伊蕉在人线国产|
久久夜色精品国产亚洲av|
久久天天躁夜夜躁狠狠85|
久久精品国产免费观看频道|
亚洲日韩欧美丝袜另类自拍|
性欧美精品xxxx|
国产精品免费视频不卡|
99久久久无码国产精品免费砚床|
97视频精品全国免费观看|
91精品国产三级在线观看|
一级片黄色一区二区三区|
亚洲中文字幕无码专区|
亚洲av不卡电影在线网址最新|
久久久国产精品樱花网站|
国产一区二区在线观看粉嫩|
亚洲欧美人成电影在线观看|
国产亚洲日韩一区二区三区|
jizzjizz日本高潮喷水|
亚洲精品成人片在线观看|
好吊视频一区二区三区人妖|
亚洲欧美综合精品成|
国产成人久久综合第一区|
亚洲成人www|
西西444www高清大胆|
国产又色又刺激高潮视频|
精品国产乱码久久久久久1区2区|
国产对白老熟女正在播放|
亚洲 卡通 欧美 制服 中文|
一区天堂中文最新版在线|
一本一道中文字幕无码东京热|
色熟妇人妻久久中文字幕|
久9re热视频这里只有精品免费|
无码综合天天久久综合网|
日韩精品区一区二区三vr|
亚洲粉嫩av一区二区黑人|
日本高清日本在线免费|