• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? 5145L BK010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? 5145L BK010 LCP
        
                
        Celanese Zenite? 5145L BK010 LCP 物性表: Celanese Zenite? 5145L BK010 LCP物性表及特性介紹,Celanese Zenite? 5145L BK010 LCP注塑參數詳情,如需Celanese Zenite? 5145L BK010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 密度 [g/cm3]: 1.75
          • 
                                
                                
        • 缺口沖擊強度: 2.5
          • 
                                
                                
        • 彎曲強度 [MPa]: 130.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 11.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.76 g/cc1.76 g/ccASTM D 792
        

        Density 1.75 g/cc0.0632 lb/in3ISO 1183
        

        Filler Content 45 %45 %
        

        Linear Mold Shrinkage, Flow 0.00090 cm/cm
        @Thickness 2.00 mm        		0.00090 in/in
        @Thickness 0.0787 in        		Parallel; ISO 294-4
        

        Linear Mold Shrinkage, Transverse 0.0050 cm/cm
        @Thickness 2.00 mm        		0.0050 in/in
        @Thickness 0.0787 in        		ISO 294-4
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength at Break 115 MPa16700 psiISO 527
        

        Tensile Strength, Ultimate 130 MPa
        @Temperature 23.0 °C        		18900 psi
        @Temperature 73.4 °F        		ASTM D 638
        

        Elongation at Break 3.1 %3.1 %ISO 527
        

          3.3 %
        @Temperature 23.0 °C        		3.3 %
        @Temperature 73.4 °F        		ASTM D 638
        

        Tensile Modulus 15.0 GPa
        @Temperature 23.0 °C        		2180 ksi
        @Temperature 73.4 °F        		ISO 527
        

        Flexural Strength  160 MPa
        @Temperature 23.0 °C        		23200 psi
        @Temperature 73.4 °F        		ASTM D 790
        

         190 MPa
        @Temperature 23.0 °C        		27600 psi
        @Temperature 73.4 °F        		ISO 178
        

        Flexural Modulus  11.0 GPa
        @Temperature 23.0 °C        		1600 ksi
        @Temperature 73.4 °F        		ISO 178
        

         13.0 GPa
        @Temperature 23.0 °C        		1890 ksi
        @Temperature 73.4 °F        		ASTM D 790
        

        Izod Impact, Notched 2.50 J/cm
        @Temperature 23.0 °C        		4.68 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 256
        

        Izod Impact, Unnotched 6.00 J/cm
        @Temperature 23.0 °C        		11.2 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 4812
        

         
        Electrical PropertiesMetricEnglishComments
        Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmASTM D 257
        

        Surface Resistance 1.00e+15 ohm1.00e+15 ohmASTM D 257
        

        Dielectric Constant  3.4
        @Frequency 1000 Hz,
         Temperature 23.0 °C        		3.4
        @Frequency 1000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         3.9
        @Frequency 1.00e+6 Hz,
         Temperature 23.0 °C        		3.9
        @Frequency 1.00e+6 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         4.4
        @Frequency 100000 Hz,
         Temperature 23.0 °C        		4.4
        @Frequency 100000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         4.5
        @Frequency 10000 Hz,
         Temperature 23.0 °C        		4.5
        @Frequency 10000 Hz,
         Temperature 73.4 °F        		ASTM D 150
        

         4.7
        @Frequency 1.00e+9 Hz,
         Temperature 23.0 °C        		4.7
        @Frequency 1.00e+9 Hz,
         Temperature 73.4 °F        		2.0mm; ASTM D 2520 B
        

         4.8
        @Frequency 1.00e+10 Hz,
         Temperature 23.0 °C        		4.8
        @Frequency 1.00e+10 Hz,
         Temperature 73.4 °F        		2.0mm; ASTM D 2520 B
        

         5.0
        @Frequency 2.00e+10 Hz,
         Temperature 23.0 °C        		5.0
        @Frequency 2.00e+10 Hz,
         Temperature 73.4 °F        		2.0mm; ASTM D 2520 B
        

        Dielectric Strength 22.0 kV/mm
        @Temperature 23.0 °C        		559 kV/in
        @Temperature 73.4 °F        		500 V/s, Short Time; ASTM D 149
        

          24.0 kV/mm
        @Thickness 2.00 mm,
         Temperature 150 °C        		610 kV/in
        @Thickness 0.0787 in,
         Temperature 302 °F        		IEC 60243-1
        

         24.0 kV/mm
        @Thickness 2.00 mm,
         Temperature 200 °C        		610 kV/in
        @Thickness 0.0787 in,
         Temperature 392 °F        		IEC 60243-1
        

         27.0 kV/mm
        @Thickness 2.00 mm,
         Temperature 100 °C        		686 kV/in
        @Thickness 0.0787 in,
         Temperature 212 °F        		IEC 60243-1
        

         35.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 200 °C        		889 kV/in
        @Thickness 0.0394 in,
         Temperature 392 °F        		IEC 60243-1
        

         40.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 150 °C        		1020 kV/in
        @Thickness 0.0394 in,
         Temperature 302 °F        		IEC 60243-1
        

         40.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 100 °C        		1020 kV/in
        @Thickness 0.0394 in,
         Temperature 212 °F        		IEC 60243-1
        

         45.0 kV/mm
        @Thickness 1.00 mm,
         Temperature 23.0 °C        		1140 kV/in
        @Thickness 0.0394 in,
         Temperature 73.4 °F        		IEC 60243-1
        

        Dissipation Factor  0.014
        @Frequency 10000 Hz        		0.014
        @Frequency 10000 Hz        		ASTM D 150
        

         0.017
        @Frequency 1000 Hz        		0.017
        @Frequency 1000 Hz        		ASTM D 150
        

         0.018
        @Frequency 100000 Hz        		0.018
        @Frequency 100000 Hz        		ASTM D 150
        

         0.018
        @Frequency 1.00e+6 Hz        		0.018
        @Frequency 1.00e+6 Hz        		ASTM D 150
        

          0.0060
        @Thickness 2.00 mm,
         Frequency 1.00e+9 Hz        		0.0060
        @Thickness 0.0787 in,
         Frequency 1.00e+9 Hz        		ASTM D2520 B
        

         0.0060
        @Thickness 2.00 mm,
         Frequency 1.00e+10 Hz        		0.0060
        @Thickness 0.0787 in,
         Frequency 1.00e+10 Hz        		ASTM D2520 B
        

         0.0080
        @Thickness 2.00 mm,
         Frequency 2.00e+10 Hz        		0.0080
        @Thickness 0.0787 in,
         Frequency 2.00e+10 Hz        		ASTM D2520 B
        

        Comparative Tracking Index 175 V175 VIEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  -1.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		-0.556 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         0.000 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		0.000 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         5.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		2.78 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         6.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		3.33 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         7.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		3.89 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  52.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         52.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		28.9 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         77.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		42.8 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         80.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		44.4 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          60.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         60.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		33.3 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         80.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		44.4 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         80.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		44.4 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         95.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		52.8 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         100 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		55.6 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Melting Point 319 °C606 °F10°C/min; ISO 11357-1/-3
        

        Deflection Temperature at 1.8 MPa (264 psi) 275 °C527 °FASTM D 648
        

         290 °C554 °FISO 75-1/-2 1993/N2
        

        UL RTI, Electrical 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        UL RTI, Mechanical with Impact 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        UL RTI, Mechanical without Impact 130 °C
        @Thickness 0.800 mm        		266 °F
        @Thickness 0.0315 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 0.800 mm        		V-0
        @Thickness 0.0315 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         V-0
        @Thickness 0.800 mm        		V-0
        @Thickness 0.0315 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		UL94
        

         V-0
        @Thickness 3.00 mm        		V-0
        @Thickness 0.118 in        		IEC 60695-11-10
        

        Glow Wire Test  800 °C
        @Thickness 2.00 mm        		1470 °F
        @Thickness 0.0787 in        		Glow Wire Ignition Temperature; IEC 60695-2-13
        

         800 °C
        @Thickness 3.00 mm        		1470 °F
        @Thickness 0.118 in        		Glow Wire Ignition Temperature; IEC 60695-2-13
        

         960 °C
        @Thickness 2.00 mm        		1760 °F
        @Thickness 0.0787 in        		Glow Wire Flammability Index; IEC 60695-2-12
        

         960 °C
        @Thickness 3.00 mm        		1760 °F
        @Thickness 0.118 in        		Glow Wire Flammability Index; IEC 60695-2-12
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 335 °C635 °FOptimum
        

         325 - 345 °C617 - 653 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorBlack
        Drying RecommendedYes
        FillerGlass Reinforced
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-GF45<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Flame Retardant Resins
         Glass Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-GF45ISO 1043
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31761.html  
        
                    
        免責聲明: 本文 Celanese Zenite? 5145L BK010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
亚洲第一福利视频导航|
国产av无码专区亚洲av软件|
国产高清自产拍av在线|
欧美日韩视频综合一区无弹窗|
国产a√精品区二区三区四区|
国产亚洲欧洲AⅤ综合一区|
中文字幕国产精品一区二|
亚洲熟妇自偷自拍另类|
亚洲人成电影网站色mp4|
色狠狠色噜噜AV一区|
精品激情视频一区二区三区|
国产精品露脸3p普通话|
天天夜碰日日摸日日澡性色AV|
一个人免费观看WWW在线视频|
国模雨珍浓密毛大尺度150p|
亚洲人成电影在线天堂色|
国产一区二区三区无码免费|
久久亚洲国产品一区二区|
精品一区二区三区不卡|
高潮迭起av乳颜射后入|
中文字幕一区二区三区麻豆|
亚洲激情一区二区三区视频|
国产亚洲精品第一综合另类|
青青草一级视频在线观看|
国产初高中生粉嫩无套第一次
|
国产美女高潮流白浆视频|
女人高潮被爽到呻吟在线观看|
一区二区三区国产不卡|
亚洲第一二三区日韩国产|
韩国精品久久久久久无码|
姑娘视频在线观看中国电影|
国产精品亚洲精品日韩已满十八小|
好爽毛片一区二区三区四|
欧美大bbbb流白水|
秋霞在线观看片无码免费不卡|
视频一区二区三区四区久久|
在线免费播放av日韩|
国产 亚洲 网友自拍|
国产精品国产亚洲区久久|
国产愉拍精品手机|
超碰成人人人做人人爽|