- 密度 [g/cm3]: 1.09
- 吸水率 [%]: 0.15
- 缺口沖擊強度: 0.374
- 斷裂伸長率 [%]: 86.2
- 彎曲強度 [MPa]: 55.0
- 彎曲模量 [MPa]: 2.76
- 熱變形溫度 [℃]: 177.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.09 - 1.22 g/cc | 0.0394 - 0.0441 lb/in3 | Average value: 1.15 g/cc Grade Count:11 |
| Filler Content | 10.0 % | 10.0 % | Average value: 10.0 % Grade Count:3 |
| Water Absorption | 0.150 - 0.350 % | 0.150 - 0.350 % | Average value: 0.230 % Grade Count:7 |
| Linear Mold Shrinkage | 0.00800 - 0.0250 cm/cm | 0.00800 - 0.0250 in/in | Average value: 0.0130 cm/cm Grade Count:11 |
| Linear Mold Shrinkage, 6.35 mm section | 0.0100 - 0.0180 cm/cm | 0.0100 - 0.0180 in/in | Average value: 0.0133 cm/cm Grade Count:6 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 55.0 - 82.7 MPa | 7980 - 12000 psi | Average value: 65.2 MPa Grade Count:11 |
| Elongation at Break | 2.00 - 10.0 % | 2.00 - 10.0 % | Average value: 6.95 % Grade Count:11 |
| Modulus of Elasticity | 3.10 - 4.14 GPa | 450 - 600 ksi | Average value: 3.54 GPa Grade Count:11 |
| Flexural Yield Strength | 86.2 - 103 MPa | 12500 - 15000 psi | Average value: 91.6 MPa Grade Count:11 |
| Flexural Modulus | 2.76 - 3.45 GPa | 400 - 500 ksi | Average value: 3.07 GPa Grade Count:11 |
| Izod Impact, Notched | 0.374 - 0.640 J/cm | 0.700 - 1.20 ft-lb/in | Average value: 0.485 J/cm Grade Count:11 |
| Izod Impact, Unnotched | 3.47 - 5.07 J/cm | 6.50 - 9.50 ft-lb/in | Average value: 4.22 J/cm Grade Count:10 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+13 - 1.00e+14 ohm-cm | 1.00e+13 - 1.00e+14 ohm-cm | Average value: 8.50e+13 ohm-cm Grade Count:6 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 177 - 204 °C | 351 - 400 °F | Average value: 197 °C Grade Count:7 |
| Deflection Temperature at 1.8 MPa (264 psi) | 93.0 - 188 °C | 199 - 370 °F | Average value: 133 °C Grade Count:11 |
| Flammability, UL94 | HB | HB | Grade Count:10 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 252 - 279 °C | 485 - 535 °F | Average value: 266 °C Grade Count:6 |
| Melt Temperature | 232 - 285 °C | 450 - 545 °F | Average value: 263 °C Grade Count:5 |
| Mold Temperature | 60.0 - 107 °C | 140 - 225 °F | Average value: 78.8 °C Grade Count:11 |
| Drying Temperature | 79.4 - 107 °C | 175 - 225 °F | Average value: 83.6 °C Grade Count:5 |
| Dry Time | 4.00 hour | 4.00 hour | Average value: 4.00 hour Grade Count:3 |
| Moisture Content | 0.200 % | 0.200 % | Average value: 0.200 % Grade Count:4 |
| Dew Point | -17.8 °C | 0.000 °F | Average value: -17.8 °C Grade Count:4 |
| Injection Pressure | 68.9 - 124 MPa | 10000 - 18000 psi | Average value: 96.5 MPa Grade Count:10 |