亚洲欧美成人一区二区三区,尹人香蕉久久99天天拍,国产高清一区二区不卡,免费视频成人片在线观看,女同AV在线播放

熔體流動速率 [g/10min]: 1.1
密度 [g/cm3]: 1.03
吸水率 [%]: 0.02
缺口沖擊強(qiáng)度: 0.3
拉伸強(qiáng)度 [MPa]: 29.0
斷裂伸長率 [%]: 28.0
彎曲強(qiáng)度 [MPa]: 79.3
彎曲模量 [MPa]: 0.520
硬度: 97.0
熱變形溫度 [℃]: 81.0

Physical Properties	Metric	English	Comments

Density	1.03 - 1.29 g/cc	0.0372 - 0.0466 lb/in3	Average value: 1.13 g/cc Grade Count:51
Water Absorption	0.0200 - 10.0 %	0.0200 - 10.0 %	Average value: 2.00 % Grade Count:36
Moisture Absorption at Equilibrium	1.30 - 3.00 %	1.30 - 3.00 %	Average value: 2.63 % Grade Count:26
Water Absorption at Saturation	8.50 - 10.0 %	8.50 - 10.0 %	Average value: 9.41 % Grade Count:23
Oxygen Transmission Rate	40.3 cc/m2/day	2.60 cc/100 in2/day	Average value: 40.3 cc/m2/day Grade Count:17
Nitrogen Transmission	14.0 cc-mm/m2-24hr-atm	35.6 cc-mil/100 in2-24hr-atm	Average value: 14.0 cc-mm/m2-24hr-atm Grade Count:17
Carbon Dioxide Transmission	72.8 cc-mm/m2-24hr-atm	185 cc-mil/100 in2-24hr-atm	Average value: 72.8 cc-mm/m2-24hr-atm Grade Count:17
Viscosity Measurement	3.00 - 205	3.00 - 205	Average value: 74.9 Grade Count:18
Maximum Moisture Content	0.0800	0.0800	Average value: 0.0800 Grade Count:17
Linear Mold Shrinkage	0.00130 - 0.0170 cm/cm	0.00130 - 0.0170 in/in	Average value: 0.0103 cm/cm Grade Count:14
Linear Mold Shrinkage, Transverse	0.00110 - 0.00140 cm/cm	0.00110 - 0.00140 in/in	Average value: 0.00125 cm/cm Grade Count:4
Melt Flow	1.10 - 9.00 g/10 min	1.10 - 9.00 g/10 min	Average value: 2.52 g/10 min Grade Count:18

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	85.0	85.0	Average value: 85.0 Grade Count:3
Hardness, Rockwell R	97.0 - 119	97.0 - 119	Average value: 108 Grade Count:6
Ball Indentation Hardness	50.0 - 160 MPa	7250 - 23200 psi	Average value: 132 MPa Grade Count:5
Tensile Strength, Ultimate	79.3 - 80.0 MPa	11500 - 11600 psi	Average value: 79.8 MPa Grade Count:3
Tensile Strength, Yield	29.0 - 186 MPa	4210 - 27000 psi	Average value: 70.6 MPa Grade Count:33
Elongation at Break	1.50 - 315 %	1.50 - 315 %	Average value: 110 % Grade Count:29
Elongation at Yield	3.40 - 92.0 %	3.40 - 92.0 %	Average value: 15.9 % Grade Count:8
Modulus of Elasticity	0.350 - 3.50 GPa	50.8 - 508 ksi	Average value: 2.23 GPa Grade Count:14
Flexural Yield Strength	28.0 - 276 MPa	4060 - 40000 psi	Average value: 94.5 MPa Grade Count:23
Flexural Modulus	0.520 - 13.8 GPa	75.4 - 2000 ksi	Average value: 3.06 GPa Grade Count:16
Izod Impact, Notched	0.300 - 5.30 J/cm	0.562 - 9.93 ft-lb/in	Average value: 1.33 J/cm Grade Count:21
Izod Impact, Notched (ISO)	8.00 - 100000 kJ/m2	3.81 - 47600 ft-lb/in2	Average value: 8.00 kJ/m2 Grade Count:4
Charpy Impact Unnotched	12.5 J/cm2 - NB	59.5 ft-lb/in2 - NB	Average value: 16.2 J/cm2 Grade Count:8
	999.9 - 999.9 J/cm2 @Temperature -30.0 - -30.0 °C	4759 - 4759 ft-lb/in2 @Temperature -22.0 - -22.0 °F	Grade Count:2
Charpy Impact, Notched	0.550 - 11.0 J/cm2	2.62 - 52.4 ft-lb/in2	Average value: 3.67 J/cm2 Grade Count:6
	6.00 - 7.00 J/cm2 @Temperature -30.0 - -30.0 °C	28.6 - 33.3 ft-lb/in2 @Temperature -22.0 - -22.0 °F	Average value: 3.75 J/cm2 Grade Count:2
Coefficient of Friction	0.0400 - 0.600	0.0400 - 0.600	Average value: 0.284 Grade Count:3

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+12 - 1.00e+15 ohm-cm	1.00e+12 - 1.00e+15 ohm-cm	Average value: 4.08e+14 ohm-cm Grade Count:15
Surface Resistance	1.00e+10 - 1.00e+15 ohm	1.00e+10 - 1.00e+15 ohm	Average value: 2.04e+14 ohm Grade Count:10
Dielectric Constant	2.50 - 20.0	2.50 - 20.0	Average value: 4.81 Grade Count:9
Dielectric Strength	13.0 - 100 kV/mm	330 - 2540 kV/in	Average value: 30.8 kV/mm Grade Count:16
Dissipation Factor	0.0190 - 0.0620	0.0190 - 0.0620	Average value: 0.0266 Grade Count:4
Comparative Tracking Index	600 V	600 V	Average value: 600 V Grade Count:6

Thermal Properties	Metric	English	Comments
CTE, linear	19.8 - 170 μm/m-°C	11.0 - 94.4 μin/in-°F	Average value: 86.9 μm/m-°C Grade Count:16
CTE, linear, Transverse to Flow	90.0 - 190 μm/m-°C	50.0 - 106 μin/in-°F	Average value: 130 μm/m-°C Grade Count:4
Thermal Conductivity	0.230 - 0.280 W/m-K	1.60 - 1.94 BTU-in/hr-ft2-°F	Average value: 0.263 W/m-K Grade Count:6
Melting Point	210 - 222 °C	410 - 432 °F	Average value: 220 °C Grade Count:34
Maximum Service Temperature, Air	70.0 - 160 °C	158 - 320 °F	Average value: 118 °C Grade Count:7
Deflection Temperature at 0.46 MPa (66 psi)	81.0 - 216 °C	178 - 420 °F	Average value: 167 °C Grade Count:23
Deflection Temperature at 1.8 MPa (264 psi)	50.0 - 204 °C	122 - 400 °F	Average value: 75.7 °C Grade Count:31
Vicat Softening Point	129 - 200 °C	264 - 392 °F	Average value: 176 °C Grade Count:3
Minimum Service Temperature, Air	-40.0 °C	-40.0 °F	Average value: -40.0 °C Grade Count:5
Flammability, UL94	HB - V-0	HB - V-0	Grade Count:15

Processing Properties	Metric	English	Comments
Processing Temperature	232 - 295 °C	450 - 563 °F	Average value: 261 °C Grade Count:11
Nozzle Temperature	238 - 266 °C	460 - 510 °F	Average value: 251 °C Grade Count:3
Adapter Temperature	260 - 266 °C	500 - 511 °F	Average value: 262 °C Grade Count:17
Die Temperature	254 - 260 °C	490 - 500 °F	Average value: 257 °C Grade Count:17
Melt Temperature	138 - 300 °C	280 - 572 °F	Average value: 252 °C Grade Count:21
Mold Temperature	21.1 - 93.3 °C	70.0 - 200 °F	Average value: 64.8 °C Grade Count:3
Drying Temperature	76.0 - 100 °C	169 - 212 °F	Average value: 82.6 °C Grade Count:4
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour	Average value: 3.00 hour Grade Count:3
Moisture Content	0.0400 - 0.0800 %	0.0400 - 0.0800 %	Average value: 0.0621 % Grade Count:14

Overview of materials for Nylon 6, Extruded