• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. PA6
          4. 
            
        4. Overview of materials for Nylon 6, Film Grade
          5. 
        
        
        
        
            
        


                
        

                
        Overview of materials for Nylon 6, Film Grade
        
                
        Overview of materials for Nylon 6, Film Grade 物性表: Overview of materials for Nylon 6, Film Grade物性表及特性介紹,Overview of materials for Nylon 6, Film Grade注塑參數詳情,如需Overview of materials for Nylon 6, Film Grade下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 熔體流動速率 [g/10min]: 3.0
          • 
                                
                                
        • 密度 [g/cm3]: 1.04
          • 
                                
                                
        • 吸水率 [%]: 1.6
          • 
                                
                                
        • 缺口沖擊強度: 0.45
          • 
                                
                                
        • 拉伸強度 [MPa]: 28.0
          • 
                                
                                
        • 斷裂伸長率 [%]: 28.0
          • 
                                
                                
        • 彎曲強度 [MPa]: 48.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 0.690
          • 
                                
                                
        • 熱變形溫度 [℃]: 51.0
          • 
                                
                                
        • 透光率 [%]: 88.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Density 1.04 - 1.38 g/cc0.0376 - 0.0500 lb/in3Average value: 1.14 g/cc Grade Count:52
        

        Water Absorption 1.60 - 10.0 %1.60 - 10.0 %Average value: 6.35 % Grade Count:15
        

        Moisture Absorption at Equilibrium 2.70 - 3.00 %2.70 - 3.00 %Average value: 2.94 % Grade Count:10
        

        Water Vapor Transmission 2.60 - 465 g/m2/day0.167 - 29.9 g/100 in2/dayAverage value: 192 g/m2/day Grade Count:13
        

        Oxygen Transmission Rate 0.230 - 192 cc/m2/day0.0148 - 12.4 cc/100 in2/dayAverage value: 27.2 cc/m2/day Grade Count:20
        

        Viscosity 3.15 - 85.0 cP3.15 - 85.0 cPAverage value: 10.3 cP Grade Count:5
        

        Viscosity Measurement 200 - 245200 - 245Average value: 227  Grade Count:5
        

        Viscosity Test 155 - 225 cm3/g155 - 225 cm3/gAverage value: 208 cm3/g Grade Count:4
        

        Thickness 10.2 - 59.0 microns0.400 - 2.32 milAverage value: 26.7 microns Grade Count:29
        

        Linear Mold Shrinkage 0.0140 cm/cm0.0140 in/inAverage value: 0.0140 cm/cm Grade Count:5
        

        Linear Mold Shrinkage, Transverse 0.0140 cm/cm0.0140 in/inAverage value: 0.0140 cm/cm Grade Count:4
        

        Melt Flow 3.00 - 50.0 g/10 min3.00 - 50.0 g/10 minAverage value: 17.4 g/10 min Grade Count:12
        

        Surface Tension 36.0 - 56.0 dynes/cm36.0 - 56.0 dynes/cmAverage value: 52.9 dynes/cm Grade Count:17
        

         
        Mechanical PropertiesMetricEnglishComments
        Ball Indentation Hardness 60.0 - 140 MPa8700 - 20300 psiAverage value: 100 MPa Grade Count:4
        

        Tensile Strength, Ultimate 48.0 - 112 MPa6960 - 16200 psiAverage value: 86.3 MPa Grade Count:6
        

        Film Tensile Strength at Yield, MD 37.9 - 51.0 MPa5500 - 7400 psiAverage value: 40.2 MPa Grade Count:6
        

        Film Tensile Strength at Yield, TD 37.2 - 82.7 MPa5400 - 12000 psiAverage value: 65.6 MPa Grade Count:10
        

        Tensile Strength, Yield 28.0 - 80.0 MPa4060 - 11600 psiAverage value: 60.1 MPa Grade Count:26
        

        Film Elongation at Break, MD 50.0 - 460 %50.0 - 460 %Average value: 182 % Grade Count:29
        

        Film Elongation at Break, TD 55.0 - 480 %55.0 - 480 %Average value: 294 % Grade Count:21
        

        Elongation at Break 3.50 - 400 %3.50 - 400 %Average value: 120 % Grade Count:27
        

        Elongation at Yield 4.00 - 25.0 %4.00 - 25.0 %Average value: 13.3 % Grade Count:10
        

        Modulus of Elasticity 0.100 - 3.30 GPa14.5 - 479 ksiAverage value: 2.00 GPa Grade Count:19
        

        Flexural Yield Strength 28.0 - 120 MPa4060 - 17400 psiAverage value: 74.9 MPa Grade Count:14
        

        Flexural Modulus 0.690 - 2.80 GPa100 - 406 ksiAverage value: 2.22 GPa Grade Count:10
        

        Secant Modulus 0.650 GPa94.3 ksiAverage value: 0.650 GPa Grade Count:6
        

        Secant Modulus, MD 0.285 - 4.69 GPa41.3 - 680 ksiAverage value: 2.17 GPa Grade Count:22
        

        Secant Modulus, TD 0.285 - 3.70 GPa41.3 - 537 ksiAverage value: 2.17 GPa Grade Count:20
        

        Izod Impact, Notched 0.450 - 10.7 J/cm0.843 - 20.0 ft-lb/inAverage value: 3.69 J/cm Grade Count:4
        

        Charpy Impact Unnotched 1000 J/cm24760 ft-lb/in2Grade Count:12
        

          5.50 - 999.9 J/cm2
        @Temperature -30.0 - -30.0 °C        		26.2 - 4759 ft-lb/in2
        @Temperature -22.0 - -22.0 °F        		Average value: 5.50 J/cm2 Grade Count:8
        

        Charpy Impact, Notched 0.500 - 5.00 J/cm22.38 - 23.8 ft-lb/in2Average value: 2.02 J/cm2 Grade Count:14
        

          0.500 - 0.500 J/cm2
        @Temperature -30.0 - -30.0 °C        		2.38 - 2.38 ft-lb/in2
        @Temperature -22.0 - -22.0 °F        		Average value: 0.500 J/cm2 Grade Count:8
        

        Coefficient of Friction 0.150 - 2.000.150 - 2.00Average value: 0.538  Grade Count:23
        

        Coefficient of Friction, Static 0.370 - 1.000.370 - 1.00Average value: 0.595  Grade Count:4
        

        Tear Strength Test 30.0 - 1400030.0 - 14000Average value: 1250  Grade Count:22
        

        Elmendorf Tear Strength MD 56.0 g56.0 gAverage value: 56.0 g Grade Count:6
        

        Elmendorf Tear Strength, MD 0.394 - 4.21 g/micron10.0 - 107 g/milAverage value: 1.86 g/micron Grade Count:4
        

        Elmendorf Tear Strength, TD 1.57 - 7.87 g/micron40.0 - 200 g/milAverage value: 4.74 g/micron Grade Count:4
        

        Film Tensile Strength at Break, MD 32.0 - 379 MPa4640 - 55000 psiAverage value: 204 MPa Grade Count:29
        

        Film Tensile Strength at Break, TD 29.0 - 303 MPa4210 - 44000 psiAverage value: 128 MPa Grade Count:21
        

         
        Electrical PropertiesMetricEnglishComments
        Electrical Resistivity 1.00e+12 - 1.00e+15 ohm-cm1.00e+12 - 1.00e+15 ohm-cmAverage value: 2.00e+14 ohm-cm Grade Count:12
        

        Surface Resistance 1.00e+13 - 1.00e+15 ohm1.00e+13 - 1.00e+15 ohmAverage value: 2.57e+14 ohm Grade Count:12
        

        Dielectric Constant 3.50 - 18.03.50 - 18.0Average value: 7.35  Grade Count:8
        

        Dielectric Strength 30.0 - 35.0 kV/mm762 - 889 kV/inAverage value: 32.0 kV/mm Grade Count:12
        

        Comparative Tracking Index 600 V600 VAverage value: 600 V Grade Count:12
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear 80.0 μm/m-°C44.4 μin/in-°FAverage value: 80.0 μm/m-°C Grade Count:8
        

        CTE, linear, Transverse to Flow 80.0 μm/m-°C44.4 μin/in-°FAverage value: 80.0 μm/m-°C Grade Count:8
        

        Melting Point 193 - 260 °C379 - 500 °FAverage value: 220 °C Grade Count:30
        

        Deflection Temperature at 0.46 MPa (66 psi) 51.0 - 161 °C124 - 322 °FAverage value: 136 °C Grade Count:12
        

        Deflection Temperature at 1.8 MPa (264 psi) 50.0 - 75.0 °C122 - 167 °FAverage value: 54.9 °C Grade Count:17
        

        Deflection Temperature at 8.0 MPa 40.0 °C104 °FAverage value: 40.0 °C Grade Count:8
        

        Vicat Softening Point 70.0 - 195 °C158 - 383 °FAverage value: 153 °C Grade Count:6
        

        Flammability, UL94 HB - V-2HB - V-2Grade Count:14
        

        Oxygen Index 24.0 %24.0 %Average value: 24.0 % Grade Count:8
        

        Glow Wire Test 750 °C1380 °FAverage value: 750 °C Grade Count:4
        

        Shrinkage 0.200 - 15.0 %0.200 - 15.0 %Average value: 4.15 % Grade Count:23
        

         
        Optical PropertiesMetricEnglishComments
        Haze 1.70 - 10.0 %1.70 - 10.0 %Average value: 5.00 % Grade Count:21
        

        Gloss 80.0 - 180 %80.0 - 180 %Average value: 139 % Grade Count:9
        

        Transmission, Visible 88.0 - 90.0 %88.0 - 90.0 %Average value: 89.8 % Grade Count:8
        

         
        Processing PropertiesMetricEnglishComments
        Processing Temperature 200 - 295 °C392 - 563 °FAverage value: 245 °C Grade Count:8
        

        Melt Temperature 230 - 290 °C446 - 554 °FAverage value: 260 °C Grade Count:4
        

        Mold Temperature 60.0 - 120 °C140 - 248 °FAverage value: 90.0 °C Grade Count:4
        

        Drying Temperature 75.0 - 100 °C167 - 212 °FAverage value: 87.5 °C Grade Count:4
        

        Moisture Content 0.0600 - 0.100 %0.0600 - 0.100 %Average value: 0.0778 % Grade Count:9
        

        Injection Pressure 80.0 - 130 MPa11600 - 18900 psiAverage value: 105 MPa Grade Count:4
        

        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-45777.html  
        
                    
        免責聲明: 本文 Overview of materials for Nylon 6, Film Grade 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
120秒试看无码体验区|
久久精品国产亚洲av麻|
在线A级毛片无码免费真人|
亚洲国产欧美日韩另类|
亚洲综合激情六月婷婷在线观看|
久久发布国产伦子伦精品|
免费国产裸体美女视频全黄|
国产高清午夜人成在线观看,|
北岛玲精品一区二区三区|
人妻日韩精品中文字幕|
欧洲美女熟乱av|
裸体女人亚洲精品一区|
我被公睡做舒服爽中文字幕|
尹人香蕉久久99天天拍|
国产91丝袜在线观看|
日韩人妻少妇一区二区三区|
亚洲精品国偷拍自产在线观看蜜臀|
老司机午夜福利视频|
亚洲午夜激情久久加勒比|
亚洲成av人片不卡无码手机版|
国产精品白浆免费视频|
亚洲av色香蕉一区二区三|
粉嫩一区二区三区精品视频|
自拍偷自拍亚洲精品情侣|
国产精品美女久久久久久麻豆|
九九热免费在线播放视频|
亚洲国产精品第一二三区|
中文字幕无码久久精品|
亚洲午夜成人精品电影在线观看|
我国产码在线观看av哈哈哈网站
|
国产在线观看网址不卡一区
|
欧美国产日韩在线三区|
一区二区国产高清视频在线|
91青青草视频在线观看的|
国产精品福利自产拍久久|
四虎成人免费视频在线播放|
国产a网站|
精品国产欧美一区二区五十路|
成在线人永久免费视频播放|
伊人久久精品无码麻豆一区|
国产精品久久久久久影视|