- 密度 [g/cm3]: 1.35
- 吸水率 [%]: 0.7
- 缺口沖擊強(qiáng)度: 1.12
- 斷裂伸長率 [%]: 268.9
- 彎曲模量 [MPa]: 8.30
- 熱變形溫度 [℃]: 254.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.35 g/cc | 0.0488 lb/in3 | ASTM D792 |
| Water Absorption | 0.70 % | 0.70 % | 24 hrs.; ASTM D570 |
| Water Absorption at Saturation | 5.4 % | 5.4 % | room temp; ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 101 | 101 | ASTM D785 |
| Tensile Strength at Break | 137.9 MPa | 20000 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Flexural Yield Strength | 268.9 MPa | 39000 psi | ASTM D790 |
| Flexural Modulus | 8.30 GPa | 1200 ksi | ASTM D790 |
| Izod Impact, Notched | 1.12 J/cm | 2.10 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 60 Hz | 3.5 @Frequency 60 Hz | 50% RH; ASTM D150 |
| Dielectric Strength | 20.9 kV/mm | 531 kV/in | ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 21.6 μm/m-°C @Temperature -20.0 - 200 °C | 12.0 μin/in-°F @Temperature -4.00 - 392 °F | ASTM D696 |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Long Term |
| 241 °C | 466 °F | Short Term | |
| Deflection Temperature at 0.46 MPa (66 psi) | 254 °C | 489 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 250 °C | 482 °F | ASTM D648 |