欧洲亚洲国内老熟女超碰,欧美视频网站www色,人妻丰满熟AV无码区HD,国产黄色三级三级看三级,久久亚洲av午夜福利精品一区

BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT

BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT 物性表: BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT物性表及特性介紹,BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT注塑參數詳情,如需BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT下載, 可到相關下載區下載

吸水率 [%]: 0.4
熱變形溫度 [℃]: 220.0

Physical Properties	Metric	English	Comments

Bulk Density	0.600 - 0.900 g/cc	0.0217 - 0.0325 lb/in3
Water Absorption	0.40 %	0.40 %	ISO 62
Moisture Absorption at Equilibrium	0.20 %	0.20 %	ISO 62
Viscosity Measurement	95	95	[cm³/g]; ISO 307
Linear Mold Shrinkage, Flow	0.0013 cm/cm	0.0013 in/in	plate with film gate 150x150x3mm³
	0.0032 cm/cm	0.0032 in/in	ISO 2577
Linear Mold Shrinkage, Transverse	0.00889 cm/cm	0.00889 in/in	plate with film gate 150x150x3mm³
	0.0097 cm/cm	0.0097 in/in	ISO 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	120 MPa	17400 psi	ISO 527-1/-2
Elongation at Break	2.2 %	2.2 %	ISO 527-1/-2
Tensile Modulus	9.50 GPa	1380 ksi	ISO 527-1/-2
Charpy Impact Unnotched	4.00 J/cm2 @Temperature -30.0 °C	19.0 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	5.00 J/cm2 @Temperature 23.0 °C	23.8 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.780 J/cm2 @Temperature 23.0 °C	3.71 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+15 ohm-cm	2.00e+15 ohm-cm	IEC 60093
Dielectric Constant	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	IEC 60250
	3.9 @Frequency 100 Hz	3.9 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.0046 @Frequency 100 Hz	0.0046 @Frequency 100 Hz	IEC 60250
	0.0202 @Frequency 1.00e+6 Hz	0.0202 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	425 V	425 V	Test Solution A; IEC 60112

Thermal Properties	Metric	English	Comments
Melting Point	223 °C	433 °F	ISO 11357-1/-2
Maximum Service Temperature, Air	170 °C	338 °F
Deflection Temperature at 0.46 MPa (66 psi)	220 °C	428 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75-1/-2
Decomposition Temperature	>= 300 °C	>= 572 °F
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection molding/Extrusion
Mold Temperature	60.0 - 100 °C	140 - 212 °F	Injection molding

Descriptive Properties
Commercial Status	Europe
Ignition Temperature	>400°C		ASTM D1929

關鍵詞:
PBT
供應
BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-37964.html

免責聲明: 本文 BASF Ultradur? S 4090 G6X High Speed 30% Glass Filled PBT 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡