- 密度 [g/cm3]: 1.53
- 吸水率 [%]: 0.37
- 缺口沖擊強度: 0.209
- 彎曲強度 [MPa]: 58.0
- 彎曲模量 [MPa]: 8.60
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.610 g/cc | 0.0220 lb/in3 | ASTM D1895 |
| Density | 1.53 g/cc | 0.0553 lb/in3 | ASTM D792 |
| Water Absorption | 0.37 % | 0.37 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00233 cm/cm | 0.00233 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 75 | 75 | ASTM D785 |
| Tensile Strength, Ultimate | 58.0 MPa | 8410 psi | ASTM D638 |
| Elongation at Break | 1.0 % | 1.0 % | ASTM D638 |
| Tensile Modulus | 8.00 GPa | 1160 ksi | ASTM D638 |
| Flexural Strength | 90.0 MPa | 13100 psi | ASTM D790 |
| Flexural Modulus | 8.60 GPa | 1250 ksi | ASTM D790 |
| Compressive Strength | 179 MPa | 26000 psi | ASTM D695 |
| Izod Impact, Notched | 0.209 J/cm | 0.392 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.220 J/cm2 | 1.05 ft-lb/in2 | ASTM D256 |
| Impact | 125 | 125 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.70e+12 ohm-cm | 1.70e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 6.4 | 6.4 | ASTM D150 |
| Dielectric Strength | 10.9 kV/mm | 277 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.070 | 0.070 | ASTM D150 |
| Arc Resistance | 179 sec | 179 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 225 °C | 437 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Shrinkage | 0.28 % | 0.28 % | 72 hr, 120oC; ASTM D1299 |