- 密度 [g/cm3]: 1.54
- 吸水率 [%]: 0.41
- 缺口沖擊強度: 0.189
- 彎曲強度 [MPa]: 54.0
- 彎曲模量 [MPa]: 8.60
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.600 g/cc | 0.0217 lb/in3 | ASTM D1895 |
| Density | 1.54 g/cc | 0.0556 lb/in3 | ASTM D792 |
| Water Absorption | 0.41 % | 0.41 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0037 cm/cm | 0.0037 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 72 | 72 | ASTM D785 |
| Tensile Strength, Ultimate | 54.0 MPa | 7830 psi | ASTM D638 |
| Elongation at Break | 0.76 % | 0.76 % | ASTM D638 |
| Tensile Modulus | 9.40 GPa | 1360 ksi | ASTM D638 |
| Flexural Strength | 74.0 MPa | 10700 psi | ASTM D790 |
| Flexural Modulus | 8.60 GPa | 1250 ksi | ASTM D790 |
| Compressive Strength | 177 MPa | 25700 psi | ASTM D695 |
| Izod Impact, Notched | 0.189 J/cm | 0.354 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.208 J/cm2 | 0.990 ft-lb/in2 | ASTM D256 |
| Impact | 110 | 110 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.60e+13 ohm-cm | 1.60e+13 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.8 | 5.8 | ASTM D150 |
| Dielectric Strength | 13.2 kV/mm | 335 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.051 | 0.051 | ASTM D150 |
| Arc Resistance | 183 sec | 183 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 207 °C | 405 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 216 °C | 421 °F | ASTM D648 |
| Flammability, UL94 | V-1 @Thickness 1.50 mm | V-1 @Thickness 0.0591 in | |
| Shrinkage | 0.38 % | 0.38 % | 72 hr, 120oC; ASTM D1299 |