- 密度 [g/cm3]: 1.39
- 吸水率 [%]: 0.41
- 缺口沖擊強度: 0.277
- 彎曲強度 [MPa]: 36.0
- 彎曲模量 [MPa]: 6.20
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.570 g/cc | 0.0206 lb/in3 | ASTM D1895 |
| Density | 1.39 g/cc | 0.0502 lb/in3 | ASTM D792 |
| Water Absorption | 0.41 % | 0.41 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0070 cm/cm | 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 69 | 69 | ASTM D785 |
| Tensile Strength, Ultimate | 36.0 MPa | 5220 psi | ASTM D638 |
| Elongation at Break | 0.71 % | 0.71 % | ASTM D638 |
| Tensile Modulus | 7.30 GPa | 1060 ksi | ASTM D638 |
| Flexural Strength | 61.0 MPa | 8850 psi | ASTM D790 |
| Flexural Modulus | 6.20 GPa | 899 ksi | ASTM D790 |
| Compressive Strength | 139 MPa | 20200 psi | ASTM D695 |
| Izod Impact, Notched | 0.277 J/cm | 0.519 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.289 J/cm2 | 1.38 ft-lb/in2 | ASTM D256 |
| Impact | 224 | 224 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 6.38e+10 ohm-cm | 6.38e+10 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.8 | 4.8 | ASTM D150 |
| Dielectric Strength | 9.80 kV/mm | 249 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.059 | 0.059 | ASTM D150 |
| Arc Resistance | 26 sec | 26 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 190 °C | 374 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 175 °C | 347 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Shrinkage | 0.22 % | 0.22 % | 72 hr, 120oC; ASTM D1299 |