- 缺口沖擊強度: 8.0
- 彎曲模量 [MPa]: 27.6
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.45 g/cc | 1.45 g/cc | ASTM D792 | ||
| Linear Mold Shrinkage | 0.00 cm/cm | 0.00 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | 138 MPa | 20000 psi | ASTM D638 | ||
| Flexural Strength | 310 MPa | 45000 psi | ASTM D790 | ||
| Flexural Modulus | 27.6 GPa | 4000 ksi | ASTM D790 | ||
| Izod Impact, Notched | 8.00 J/cm | 15.0 ft-lb/in | ASTM D256 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 5.50 μm/m-°C | 3.06 μin/in-°F | TMA | ||
| Thermal Conductivity | 0.450 W/m-K | 3.12 BTU-in/hr-ft2-°F | |||
| Maximum Service Temperature, Air | 175 °C | 347 °F | |||
| 300 °C | 572 °F | Deflection Temperature, Load not specified; ASTM D648 | |||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 129 - 166 °C | 265 - 330 °F | Mold Temperature | ||
| Cure Time | 5.00 - 10.0 min | 0.0833 - 0.167 hour | |||
| Shelf Life | 6.00 Month @Temperature -12.2 °C | 6.00 Month @Temperature 10.0 °F | |||
| Descriptive Properties | |||||
| Fiber Length (in) | 0.5 | Carbon | |||