• <samp id="w83am"><delect id="w83am"></delect></samp>
        2. 

        <strong id="w83am"></strong>
        <bdo id="w83am"></bdo>
        

        
日本亚洲欧洲无免费码在线,亚洲婷婷六月的婷婷,亚洲精品国产综合久久一线,国产精品香港三级国产av,国模粉嫩小泬视频在线观看,h动态图男女啪啪27报gif,猫咪社区免费资源在线观看,亚洲国产精品成人av网 


    

    
    
        
        
          
            
        1. 首頁
          2. 
            
        2. 英文物性
          3. 
            
        3. LCP
          4. 
            
        4. Celanese Zenite? ZE55801 NC010 LCP
          5. 
        
        
        
        
            
        


                
        

                
        Celanese Zenite? ZE55801 NC010 LCP
        
                
        Celanese Zenite? ZE55801 NC010 LCP 物性表: Celanese Zenite? ZE55801 NC010 LCP物性表及特性介紹,Celanese Zenite? ZE55801 NC010 LCP注塑參數詳情,如需Celanese Zenite? ZE55801 NC010 LCP下載, 可到相關下載區下載
        

                
        
                    
        
                        
        

                            
          
                                
                                
        • 缺口沖擊強度: 3.45
          • 
                                
                                
        • 彎曲強度 [MPa]: 140.0
          • 
                                
                                
        • 彎曲模量 [MPa]: 11.0
          • 
                                
                            
        

                            
         
        Physical PropertiesMetricEnglishComments
        Specific Gravity 1.65 g/cc1.65 g/ccASTM D 792
        

        Filler Content 30 %30 %
        

         
        Mechanical PropertiesMetricEnglishComments
        Tensile Strength, Ultimate 140 MPa
        @Temperature 23.0 °C        		20300 psi
        @Temperature 73.4 °F        		ASTM D 638
        

        Elongation at Break 4.0 %
        @Temperature 23.0 °C        		4.0 %
        @Temperature 73.4 °F        		ASTM D 638
        

        Flexural Strength 150 MPa21800 psiASTM D 790
        

        Flexural Modulus 11.0 GPa
        @Temperature 23.0 °C        		1600 ksi
        @Temperature 73.4 °F        		ASTM D 790
        

        Izod Impact, Notched 3.45 J/cm
        @Temperature 23.0 °C        		6.46 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 256
        

        Izod Impact, Unnotched 8.58 J/cm
        @Temperature 23.0 °C        		16.1 ft-lb/in
        @Temperature 73.4 °F        		ASTM D 4812
        

         
        Electrical PropertiesMetricEnglishComments
        Comparative Tracking Index 150 V150 VIEC 60112
        

         
        Thermal PropertiesMetricEnglishComments
        CTE, linear  -4.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		-2.22 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         -4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		-2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         1.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 260 °C        		0.556 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         2.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature -40.0 - 23.0 °C        		1.11 μin/in-°F
        @Thickness 0.0787 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         2.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 23.0 °C        		1.11 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2
        

         2.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature -40.0 - 260 °C        		1.11 μin/in-°F
        @Thickness 0.157 in,
         Temperature -40.0 - 500 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		1.67 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         3.00 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		1.67 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         4.00 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		2.22 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

        CTE, linear, Transverse to Flow  58.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		32.2 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 2mm
        

         60.0 μm/m-°C
        @Temperature -40.0 - 23.0 °C        		33.3 μin/in-°F
        @Temperature -40.0 - 73.4 °F        		ISO 11359-1/-2; 4mm
        

         85.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		47.2 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 2mm
        

         88.0 μm/m-°C
        @Temperature -40.0 - 260 °C        		48.9 μin/in-°F
        @Temperature -40.0 - 500 °F        		ISO 11359-1/-2; 4mm
        

          66.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 23.0 - 55.0 °C        		36.7 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         69.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 23.0 - 55.0 °C        		38.3 μin/in-°F
        @Thickness 0.157 in,
         Temperature 73.4 - 131 °F        		ISO 11359-1/-2
        

         88.0 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 55.0 - 160 °C        		48.9 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         91.0 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 55.0 - 160 °C        		50.6 μin/in-°F
        @Thickness 0.157 in,
         Temperature 131 - 320 °F        		ISO 11359-1/-2
        

         105 μm/m-°C
        @Thickness 2.00 mm,
         Temperature 160 - 260 °C        		58.3 μin/in-°F
        @Thickness 0.0787 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

         110 μm/m-°C
        @Thickness 4.00 mm,
         Temperature 160 - 260 °C        		61.1 μin/in-°F
        @Thickness 0.157 in,
         Temperature 320 - 500 °F        		ISO 11359-1/-2
        

        Deflection Temperature at 1.8 MPa (264 psi) 260 °C500 °FISO 75-1/-2
        

        UL RTI, Electrical 130 °C
        @Thickness 1.50 mm        		266 °F
        @Thickness 0.0591 in        		UL 746B
        

        UL RTI, Mechanical with Impact 130 °C
        @Thickness 1.50 mm        		266 °F
        @Thickness 0.0591 in        		UL 746B
        

        UL RTI, Mechanical without Impact 130 °C
        @Thickness 1.50 mm        		266 °F
        @Thickness 0.0591 in        		UL 746B
        

        Flammability, UL94  V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		IEC 60695-11-10
        

         V-0
        @Thickness 1.50 mm        		V-0
        @Thickness 0.0591 in        		UL94
        

         
        Processing PropertiesMetricEnglishComments
        Melt Temperature 335 °C635 °FOptimum
        

         330 - 350 °C626 - 662 °F
        

        Mold Temperature 80.0 °C176 °FOptimum
        

         40.0 - 150 °C104 - 302 °F
        

        Drying Temperature 150 °C302 °F
        

        Dry Time 3 hour3 hourDehumidified Dryer
        

        Moisture Content <= 0.010 %<= 0.010 %
        

         
        Descriptive Properties
        ColorNatural
        Drying RecommendedYes
        FillerGlass Reinforced
        FormsPellets
        GenericLCP
        Part Marking Code>LCP-GF30<ISO 11469
        Polymer FamilyLCP
        Polymer TypeLCP
        Processing MethodInjection Molding
        Product CategoryElectrical Resins
         Glass Reinforced Resins
        Region AvailableAmericas
         Asia/Pacific
         Europe
        Resin IdentificationLCP-GF30ISO 1043
        
  
  

  

  
        
                        
        
                        
                    
        
                
        





                

                
        
                    
        轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/
        
                    
        本文鏈接: http://www.spnmy.cn/yuanliaoku/show-31787.html  
        
                    
        免責聲明: 本文 Celanese Zenite? ZE55801 NC010 LCP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡  
        
                
        

                




            
        
        
        
    
        



    
        
        
        
            
        
                
        
                    
        
                        塑膠原料之家，專業塑料網站、原料報價網站，免費發布塑膠供求信息。塑膠原料之家為您提供塑料供應、塑料求購、塑料行情、塑料展會、塑料原料資訊服務。
                    
        
                    
        
                        2008-2015 塑料|塑膠原料|物性表大全|UL黃卡|SGS報告查詢|最新價格--塑膠原料之家
                    
        
                    
        
                      滬ICP備15027283號-4
                    
        
                
        

            
        
        
        
    
        

    
    
    




主站蜘蛛池模板：
国产一区二区不卡在线|
国产肥臀视频一区二区三区|
国产在线中文字幕精品|
久久精品国产亚洲av热一区|
亚洲欧美牲交|
色天天综合网|
国产激情第一区二区三区|
亚洲国产欧美在线人成|
浪潮av色综合久久天堂|
人人妻人人玩人人澡人人爽|
92自拍偷拍精品视频|
精品无码久久久久久尤物|
欧美激情第一欧美在线|
福利一区二区不卡国产|
AV大片在线无码永久免费
|
久久人人爽人人爽人人片dvd
|
国产在线一区二区在线视频|
成人拍拍拍无遮挡免费视频|
亚洲av熟女天堂系列|
久久狠狠高潮亚洲精品夜色|
亚洲AV永久中文无码精品综合|
日本免费人成视频在线观看|
国产特级毛片aaaaaa毛片|
国产亚洲天堂另类综合|
四虎国产精品免费久久久|
日韩精品成人无码专区免费|
野外做受三级视频|
欧美老熟妇牲交|
午夜精品亚洲一区二区三区|
内射老阿姨1区2区3区4区|
99久久国产综合精品色|
久久96热在精品国产高清|
av新版天堂在线观看|
一区二区三区四区精品视频|
不卡在线一区二区三区视频|
国产又爽又黄又爽又刺激|
国产女人高潮叫床视频|
精品国产迷系列在线观看|
久久免费精品国产72精品|
99国产欧美另类久久久精品|
亚洲AV高清一区二区三区尤物|