顆粒圖：
物性表:
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.38 g/cc | 0.0499 lb/in³ | ISO 1183 | ||
| Water Absorption | 0.80 % @Temperature 23.0 °C, Time 86400 sec |
0.80 % @Temperature 73.4 °F, Time 24.0 hour |
ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm | 0.0050 in/in | |||
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 121 | 121 | ASTM D786 | ||
| Tensile Strength, Yield | 195 MPa | 28300 psi | ASTM D638 | ||
| Elongation at Break | 2.0 % | 2.0 % | ASTM D638 | ||
| Flexural Strength | 270 MPa | 39200 psi | ASTM D790 | ||
| Flexural Modulus | 9.10 GPa | 1320 ksi | ASTM D790 | ||
| Izod Impact, Notched | 1.20 J/cm | 2.25 ft-lb/in | ASTM D265 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
| Surface Resistance | 6.00e+13 ohm | 6.00e+13 ohm | IEC 60093 | ||
| Dielectric Constant | 3.75 | 3.75 | IEC60250 | ||
| Dielectric Strength | 40.0 kV/mm | 1020 kV/in | IEC 60243 | ||
| Dissipation Factor | 0.010 | 0.010 | IEC 60250 | ||
| Comparative Tracking Index | 500 V | 500 V | Solution B; IEC 60112 | ||
| 600 V | 600 V | Solution A; IEC 60112 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 4.50 µm/m-°C @Temperature 23.0 - 85.0 °C |
2.50 µin/in-°F @Temperature 73.4 - 185 °F |
ASTM D696 | ||
| Melting Point | 262 °C | 504 °F | ISO 11357 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 255 °C | 491 °F | ASTM D648 | ||
| Flammability, UL94 | HB @Thickness 1.60 - 3.20 mm |
HB @Thickness 0.0630 - 0.126 in |
ISO 1210 | ||
| Oxygen Index | 23 % | 23 % | ISO 4589 | ||
| Glow Wire Test | 650 °C @Thickness 0.800 mm |
1200 °F @Thickness 0.0315 in |
flammability index; IEC-60695-2-12 | ||
| 650 °C @Thickness 1.60 mm |
1200 °F @Thickness 0.0630 in |
ignition temperature; IEC-60695-2-13 | |||
| Processing Properties | Metric | English | Comments | ||
| Feed Temperature | 270 - 275 °C | 518 - 527 °F | |||
| Front Barrel Temperature | 285 - 295 °C | 545 - 563 °F | |||
| Mold Temperature | 80.0 - 100 °C | 176 - 212 °F | |||
| Drying Temperature | 80.0 °C | 176 °F | |||
| Moisture Content | <= 0.20 % | <= 0.20 % | |||
| De |
|||||
| Compression Zone | 275-285°C | ||||
| Fire and smoke F index | 2 | NF F16 101, I2,F3 |
|||
用途：
廣泛應用于機械、儀器儀表、汽車部件、電子電氣、鐵路、家電、通訊、紡機、體育休閑用品、油管、油箱及一些精密工程制品。
電子電器：連接器、卷線軸、計時器、護蓋斷路器、開關殼座。
汽車： 散熱風扇、門把、油箱蓋、進氣隔柵、水箱護蓋、燈座。
工業零件：椅座、自行車輸框、溜冰鞋底座、紡織梭、踏板、滑輸。
上海松翰塑化科技有限公司，供應原料，品質真實,物實價廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
歡迎各位客戶前來咨詢：
聯系人： 夏先生
手 機：13501802636
QQ ：205730283
郵 箱 ：205730283@qq.com