顆粒樣圖：
物性表:
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.69 g/cc | 1.69 g/cc | |||
| Filler Content | 60 % | 60 % | Long Glass Fiber | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Ultimate | 276 MPa | 40000 psi | |||
| Tensile Modulus | 21.4 GPa | 3100 ksi | |||
| Flexural Strength | 427 MPa | 62000 psi | |||
| Flexural Modulus | 19.3 GPa | 2800 ksi | |||
| Izod Impact, Notched | 4.27 J/cm | 8.00 ft-lb/in | |||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | |||
| Processing Properties | Metric | English | Comments | ||
| Rear Barrel Temperature | 260 °C | 500 °F | |||
| Middle Barrel Temperature | 266 °C | 510 °F | |||
| Front Barrel Temperature | 271 °C | 520 °F | |||
| Nozzle Temperature | 271 °C | 520 °F | |||
| Melt Temperature | 266 - 277 °C | 510 - 530 °F | |||
| Mold Temperature | 79.4 °C | 175 °F | |||
| Drying Temperature | 85.0 °C | 185 °F | |||
| Dry Time | 4 hour | 4 hour | |||
| Dew Point | -28.9 °C | -20.0 °F | |||
| Injection Pressure | 68.9 MPa | 10000 psi | |||
| Screw Speed | 50 - 75 rpm | 50 - 75 rpm | |||
| De |
|||||
| Nozzle ID | 0.25 Inches | ||||
| Screw Design | 20:1 L/D | ||||
應用：廣泛用于制造機械、汽車、化學與電氣裝置的零件，如齒輪、滾子、滑輪、輥軸、泵體中葉輪、風扇葉片、高壓密封圍、閥座、墊片、襯套、各種把手、支撐架、電線包內層等。
上海松翰塑化科技有限公司，供應原料，品質真實,物實價廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
歡迎各位客戶前來咨詢：
聯系人： 夏先生
手 機：13501802636
QQ ：205730283
郵 箱 ：205730283@qq.com