- 密度 [g/cm3]: 1.02
- 吸水率 [%]: 2.3
- 拉伸強度 [MPa]: 35.0
- 熱變形溫度 [℃]: 70.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.02 g/cc | 0.0368 lb/in3 | ISO 1183 | ||
| Water Absorption | 2.3 % | 2.3 % | ISO 62 | ||
| Moisture Absorption | 1.00 % | 1.00 % | ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | 68 | 68 | conditioned, 15s; ISO 868 | ||
| 72 | 72 | dry, 15s; ISO 868 | |||
| Tensile Strength, Yield | 35.0 MPa | 5080 psi | dry; ISO 527-1/-2 | ||
| 40.0 MPa | 5800 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | >= 50 % | >= 50 % | dry; ISO 527-1/-2 | ||
| >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | |||
| Elongation at Yield | 5.0 % | 5.0 % | dry; ISO 527-1/-2 | ||
| 20 % | 20 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 0.950 GPa | 138 ksi | conditioned; ISO 527-1/-2 | ||
| 1.50 GPa | 218 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
| NB | NB | conditioned; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 7.50 J/cm2 | 35.7 ft-lb/in2 | dry; ISO 179/1eA | ||
| NB | NB | conditioned; ISO 179/1eA | |||
| 2.00 J/cm2 @Temperature 30.0 °C | 9.52 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 2.00 J/cm2 @Temperature 30.0 °C | 9.52 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | conditioned; IEC 60093 | ||
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | IEC 60093 | ||
| Dielectric Strength | 37.0 kV/mm | 940 kV/in | dry; IEC 60243-1 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 180 μm/m-°C | 100 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 110 μm/m-°C | 61.1 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 213 °C | 415 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 70.0 °C | 158 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Automotive electr. and electronics, lighting | |||||
| Compressed air systems | |||||
| Cooling and climate control | |||||
| Hydraulic systems | |||||
| Electricals & Electronics | Cables & Tubes | ||||
| Form | Granules | ||||
| Industry & Consumer goods | Hydraulics & Pneumatics | ||||
| Processing | Other Extrusion | ||||
| Profile Extrusion | |||||
| Product Attributes | High viscosity | ||||
| Hydrolysis resistant | |||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||