- 密度 [g/cm3]: 1.1
- 吸水率 [%]: 0.15
- 缺口沖擊強度: 0.961
- 斷裂伸長率 [%]: 186
- 彎曲強度 [MPa]: 121.0
- 彎曲模量 [MPa]: 6.55
- 熱變形溫度 [℃]: 193.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.10 - 1.28 g/cc | 0.0397 - 0.0462 lb/in3 | Average value: 1.19 g/cc Grade Count:7 |
| Filler Content | 25.0 - 40.0 % | 25.0 - 40.0 % | Average value: 30.0 % Grade Count:3 |
| Water Absorption | 0.150 % | 0.150 % | Average value: 0.150 % Grade Count:3 |
| Additive Loading | 15.0 - 25.0 % | 15.0 - 25.0 % | Average value: 21.3 % Grade Count:4 |
| Linear Mold Shrinkage | 0.000500 - 0.00300 cm/cm | 0.000500 - 0.00300 in/in | Average value: 0.00129 cm/cm Grade Count:7 |
| Linear Mold Shrinkage, 6.35 mm section | 0.00200 cm/cm | 0.00200 in/in | Average value: 0.00200 cm/cm Grade Count:3 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 121 - 207 MPa | 17500 - 30000 psi | Average value: 158 MPa Grade Count:7 |
| Elongation at Break | 1.00 - 5.50 % | 1.00 - 5.50 % | Average value: 3.18 % Grade Count:7 |
| Modulus of Elasticity | 7.24 - 22.8 GPa | 1050 - 3300 ksi | Average value: 13.4 GPa Grade Count:7 |
| Flexural Yield Strength | 186 - 276 MPa | 27000 - 40000 psi | Average value: 225 MPa Grade Count:7 |
| Flexural Modulus | 6.55 - 17.2 GPa | 950 - 2500 ksi | Average value: 11.1 GPa Grade Count:7 |
| Izod Impact, Notched | 0.961 - 2.14 J/cm | 1.80 - 4.00 ft-lb/in | Average value: 1.40 J/cm Grade Count:7 |
| Izod Impact, Unnotched | 5.34 - 10.7 J/cm | 10.0 - 20.0 ft-lb/in | Average value: 8.12 J/cm Grade Count:7 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.100 - 10.0 ohm-cm | 0.100 - 10.0 ohm-cm | Average value: 5.39 ohm-cm Grade Count:4 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 0.46 MPa (66 psi) | 193 - 235 °C | 380 - 455 °F | Average value: 216 °C Grade Count:3 |
| Deflection Temperature at 1.8 MPa (264 psi) | 188 - 232 °C | 370 - 450 °F | Average value: 210 °C Grade Count:4 |
| Flammability, UL94 | HB | HB | Grade Count:7 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 216 - 282 °C | 420 - 540 °F | Average value: 249 °C Grade Count:3 |
| Melt Temperature | 224 - 288 °C | 435 - 550 °F | Average value: 256 °C Grade Count:4 |
| Mold Temperature | 37.8 - 65.6 °C | 100 - 150 °F | Average value: 51.7 °C Grade Count:7 |
| Drying Temperature | 79.4 °C | 175 °F | Average value: 79.4 °C Grade Count:4 |
| Moisture Content | 0.200 % | 0.200 % | Average value: 0.200 % Grade Count:4 |
| Dew Point | -17.8 °C | 0.000 °F | Average value: -17.8 °C Grade Count:4 |
| Injection Pressure | 68.9 - 103 MPa | 10000 - 15000 psi | Average value: 86.2 MPa Grade Count:7 |