- 彎曲強(qiáng)度 [MPa]: 10.7
- 脆化溫度 [℃]: -41.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Mooney Viscosity | 63 @Temperature 100 °C | 63 @Temperature 212 °F | ML 1 + 4 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 64 | 64 | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tensile Strength, Ultimate | 10.7 MPa | 1550 psi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Elongation at Break | 301 % | 301 % | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 50% Modulus | 0.00190 GPa | 0.276 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 100% Modulus | 0.00400 GPa | 0.580 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 200% Modulus | 0.00780 GPa | 1.13 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| 300% Modulus | 0.0103 GPa | 1.49 ksi | Vulcanizate, Press cured, TC95 +3min at 160°C |
| Tear Strength | 26.0 kN/m | 148 pli | Die C, Vulcanizate, Press cured, TC95 +3min at 160°C |
| Compression Set | 60 % @Temperature 125 °C | 60 % @Temperature 257 °F | Pellets cured MDR t'95 + 15 min, 70 hr; Method B |
| Thermal Properties | Metric | English | Comments |
| Brittleness Temperature | -41.0 °C | -41.8 °F | Temperature Retraction, TR-10 |
- 關(guān)鍵詞:
- TSE
- 供應(yīng)
- Dow Nordel? IP 5565 ASTM D3568