- 密度 [g/cm3]: 1.58
- 彎曲模量 [MPa]: 6.50
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.600 - 0.800 g/cc | 0.0217 - 0.0289 lb/in3 | Powder Density; ISO 60 | ||
| Density | 1.58 g/cc | 0.0571 lb/in3 | Relative Density; ISO 1183 | ||
| Linear Mold Shrinkage | 0.0050 - 0.0060 cm/cm | 0.0050 - 0.0060 in/in | Injection Molding; ISO 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 40.0 - 50.0 MPa | 5800 - 7250 psi | ISO 527 | ||
| Elongation at Break | 0.55 - 0.65 % | 0.55 - 0.65 % | Tensile; ISO 527 | ||
| 1.2 - 1.4 % | 1.2 - 1.4 % | Flexure; ISO 178 | |||
| Tensile Modulus | 9.00 - 11.0 GPa | 1310 - 1600 ksi | ISO 527 | ||
| Flexural Strength | 80.0 - 100 MPa | 11600 - 14500 psi | At Rupture; ISO 178 | ||
| Flexural Modulus | 6.50 - 8.00 GPa | 943 - 1160 ksi | ISO 178 | ||
| Compressive Strength | 200 - 230 MPa | 29000 - 33400 psi | ISO 604 | ||
| Charpy Impact Unnotched | 0.600 - 0.800 J/cm2 | 2.86 - 3.81 ft-lb/in2 | ISO 179 | ||
| Charpy Impact, Notched | 0.200 - 0.300 J/cm2 | 0.952 - 1.43 ft-lb/in2 | ISO 179 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 25.0 kV/mm | 635 kV/in | IEC 243 | ||
| Comparative Tracking Index | 175 V | 175 V | IEC 112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 30.0 - 40.0 μm/m-°C @Temperature 20.0 °C | 16.7 - 22.2 μin/in-°F @Temperature 68.0 °F | TMA | ||
| CTE, linear, Transverse to Flow | 40.0 - 50.0 μm/m-°C @Temperature 20.0 °C | 22.2 - 27.8 μin/in-°F @Temperature 68.0 °F | TMA | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 160 - 180 °C | 320 - 356 °F | ISO 75 Af | ||
| Deflection Temperature at 8.0 MPa | 130 - 150 °C | 266 - 302 °F | ISO 75 C | ||
| Flammability, UL94 | V-1 @Thickness 1.60 mm | V-1 @Thickness 0.0630 in | |||
| V-0 @Thickness 4.00 mm | V-0 @Thickness 0.157 in | ||||
| Shrinkage | 0.15 - 0.30 % | 0.15 - 0.30 % | Post Shrinkage; ISO 2577 | ||
| Descriptive Properties | |||||
| Color | Black | ||||
| ISO type | PF 2 C3 | ||||
| Main Filler | Mineral & Organic | ||||
| Molding Method | Compression, transfer, injection | ||||