- 密度 [g/cm3]: 1.58
- 吸水率 [%]: 0.208
- 缺口沖擊強度: 0.174
- 彎曲強度 [MPa]: 51.0
- 彎曲模量 [MPa]: 10.5
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.720 g/cc | 0.0260 lb/in3 | ASTM D1895 |
| Density | 1.58 g/cc | 0.0571 lb/in3 | ASTM D792 |
| Water Absorption | 0.208 % | 0.208 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00289 cm/cm | 0.00289 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 76 | 76 | ASTM D785 |
| Tensile Strength, Ultimate | 51.0 MPa | 7400 psi | ASTM D638 |
| Elongation at Break | 0.53 % | 0.53 % | ASTM D638 |
| Tensile Modulus | 11.6 GPa | 1680 ksi | ASTM D638 |
| Flexural Strength | 72.0 MPa | 10400 psi | ASTM D790 |
| Flexural Modulus | 10.5 GPa | 1520 ksi | ASTM D790 |
| Compressive Strength | 159 MPa | 23100 psi | ASTM D695 |
| Izod Impact, Notched | 0.174 J/cm | 0.326 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.213 J/cm2 | 1.01 ft-lb/in2 | ASTM D256 |
| Impact | 104 | 104 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.80e+12 ohm-cm | 1.80e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.1 | 5.1 | ASTM D150 |
| Dielectric Strength | 10.6 kV/mm | 269 kV/in | Step by Step; ASTM D149 |
| 15.8 kV/mm | 401 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.045 | 0.045 | ASTM D150 |
| Arc Resistance | 182 sec | 182 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 205 °C | 401 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 203 °C | 397 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 0.142 % | 0.142 % | 72 hr, 120oC; ASTM D1299 |