- 密度 [g/cm3]: 1.19
- 吸水率 [%]: 0.12
- 缺口沖擊強度: 0.587
- 斷裂伸長率 [%]: 82.7
- 彎曲強度 [MPa]: 51.7
- 彎曲模量 [MPa]: 2.34
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 - 1.49 g/cc | 0.0430 - 0.0538 lb/in3 | Average value: 1.30 g/cc Grade Count:12 |
| Filler Content | 5.00 - 40.0 % | 5.00 - 40.0 % | Average value: 20.0 % Grade Count:9 |
| Water Absorption | 0.120 - 0.230 % | 0.120 - 0.230 % | Average value: 0.172 % Grade Count:6 |
| Linear Mold Shrinkage | 0.00100 - 0.00900 cm/cm | 0.00100 - 0.00900 in/in | Average value: 0.00336 cm/cm Grade Count:10 |
| Linear Mold Shrinkage, 6.35 mm section | 0.00200 - 0.00800 cm/cm | 0.00200 - 0.00800 in/in | Average value: 0.00367 cm/cm Grade Count:6 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 51.7 - 160 MPa | 7500 - 23200 psi | Average value: 88.4 MPa Grade Count:12 |
| Elongation at Break | 2.00 - 10.0 % | 2.00 - 10.0 % | Average value: 5.37 % Grade Count:9 |
| Modulus of Elasticity | 2.21 - 11.7 GPa | 320 - 1700 ksi | Average value: 6.25 GPa Grade Count:9 |
| Flexural Yield Strength | 82.7 - 230 MPa | 12000 - 33400 psi | Average value: 130 MPa Grade Count:12 |
| Flexural Modulus | 2.34 - 11.0 GPa | 340 - 1600 ksi | Average value: 5.40 GPa Grade Count:12 |
| Izod Impact, Notched | 0.587 - 10.7 J/cm | 1.10 - 20.0 ft-lb/in | Average value: 2.31 J/cm Grade Count:11 |
| Izod Impact, Unnotched | 3.74 - 5340 J/cm | 7.00 - 10000 ft-lb/in | Average value: 7.43 J/cm Grade Count:9 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | Average value: 1.00e+16 ohm-cm Grade Count:5 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 98.9 - 200 °C | 210 - 392 °F | Average value: 127 °C Grade Count:9 |
| Flammability, UL94 | HB - V-0 | HB - V-0 | Grade Count:7 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 202 - 249 °C | 395 - 480 °F | Average value: 225 °C Grade Count:9 |
| Mold Temperature | 32.2 - 65.6 °C | 90.0 - 150 °F | Average value: 48.9 °C Grade Count:9 |
| Injection Pressure | 55.2 - 82.7 MPa | 8000 - 12000 psi | Average value: 68.9 MPa Grade Count:9 |