久久精品亚洲成在人线av麻豆,一个人免费观看WWW在线视频,人妻无码,在线看免费无码的av天堂,99久久婷婷国产综合精品

Ultramid? 8272G HS BK-102|PA6-GF12|BASF

Product TextsUltramid? 8272G HS BK-102 is a 12% glass fiber reinforced, black pigmented, thermally modified, Polyamid 6 blow molding compound offering an excellent balance of engineering properties combined with the melt strength ideally suited for blow molding and other applications requiring ultra high melt viscosity. It exhibits improved strength, stiffness and creep resistance compare to standard blow molding grades. Outstanding permeability and chemical resistance to oils, hydrocarbons and most solventIt is ideal for air ducts, reservoirs and covers.

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	5220 / 3100	MPa	ISO 527-1/-2
屈服應力(Yield stress)	- / 65	MPa	ISO 527-1/-2
屈服應變(Yield strain)	- / 15	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	- / 20	%	ISO 527-1/-2

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	170 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	210 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	28 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	72 / *	E-6/K	ISO 11359-1/-2

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
體積電阻率(Volume resistivity)	>1E13 / >1E13	Ohm*m	IEC 60093

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	8.3 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.3 / *	%	Sim. to ISO 62
密度(Density)	1220 / *	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	275	°C	ISO 294
Injection Molding, mold temperature	95	°C	ISO 10724

Diagrams Water content: 0.15%If drying Drying time is The degree of crystallinity of thin 6mm (.023") or less, may be controlled A cold mold, 5-30 degC (41-86 degF), As part complexity increases, lower DisclaimerCopyright M-Base .

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94815.html

免責聲明: 本文 Ultramid? 8272G HS BK-102|PA6-GF12|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡