中文字幕v亚洲日本在线电影,91福利国产午夜亚洲精品,在线免费播放av观看,国产一区二区三区黄色片,日本高清www无色夜在线视频

Ultramid? 8202 HS|PA6|BASF

Ultramid? 8202 HS|PA6|BASF 物性表: Ultramid? 8202 HS|PA6|BASF物性表及特性介紹,Ultramid? 8202 HS|PA6|BASF注塑參數詳情,如需Ultramid? 8202 HS|PA6|BASF下載, 可到相關下載區下載

Product TextsUltramid? 8202 HS is a heat stabilized, low viscosity, general purpose Polyamid 6 injection molding.The heat stabilizer system extends the retention of properties at the more elevated temperatures.Excellent in filling thin walls or areas.

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2700 / 970	MPa	ISO 527-1/-2
屈服應力(Yield stress)	78 / 36	MPa	ISO 527-1/-2
屈服應變(Yield strain)	4 / 16	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	25 / >50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / -	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	51 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	3.5 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	220 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	60 / *	°C	ISO 75-1/-2
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.7 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
體積電阻率(Volume resistivity)	>1E13 / -	Ohm*m	IEC 60093
相比漏電起痕指數(Comparative tracking index)	- / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	9.5 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.7 / *	%	Sim. to ISO 62
密度(Density)	1130 / *	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	932	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.264	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	3730	J/(kg K)	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

Diagrams Water content: 0.2% If drying becomes necessary, a dehumidifying or desiccant dryer operating at 80 °C (176 °F) is recommended. Drying time is dependent on moisture level. Alternatively, please contact your BASF representative. Packing pressure affects the final part and can be used effectively in controlling sink marks and shrinkage. ItDisclaimerCopyright M-Base .

關鍵詞:
PA6
BASF
Ultramid? 8202 HS

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-94810.html

免責聲明: 本文 Ultramid? 8202 HS|PA6|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡