国产福利微视频一区二区,一区一区三区产品乱码,亚洲天堂伊人久久a成人,色综合热无码热国产,日本精品网

VESTAMID? X7229 nc (nf)|PA12|Evonik Industries

VESTAMID? X7229 nc (nf)|PA12|Evonik Industries 物性表: VESTAMID? X7229 nc (nf)|PA12|Evonik Industries物性表及特性介紹,VESTAMID? X7229 nc (nf)|PA12|Evonik Industries注塑參數詳情,如需VESTAMID? X7229 nc (nf)|PA12|Evonik Industries下載, 可到相關下載區下載

Product TextsVESTAMID? X7229 nc6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.8	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1000	MPa	ISO 527-1/-2
屈服應力(Yield stress)	36	MPa	ISO 527-1/-2
屈服應變(Yield strain)	17	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	11	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	5	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	175	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	40	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	130	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	80	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1700	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E11	Ohm*m	IEC 60093
電氣強度(Electric strength)	27	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.6	%	Sim. to ISO 62
密度(Density)	1060	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	270	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingProfile Extrusion, Other ExtrusionDelivery formPelletsRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationOther extrusionPREPROCESSING INFORMATION1 % The drying time isAt a drying temperature of 80°C we recommend,Fresh air dryers are acceptable,1 % The drying time isAt a drying temperature of 80°C we recommend,Fresh air dryers are acceptable, .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-101058.html

免責聲明: 本文 VESTAMID? X7229 nc (nf)|PA12|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡