久久精品免视看国产成人,国产精品黑色丝袜在线观看,蜜桃草视频免费在线观看,男人av无码天堂,欧美寡妇xxxx黑人猛交

VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries

VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries 物性表: VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries物性表及特性介紹,VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries注塑參數詳情,如需VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries下載, 可到相關下載區下載

7507 \| PA12 \| Evonik Industries Product TextsVESTAMID? L2124 blk 9.7507 of deflection under load (1.80 MPa)	45 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	90 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	125 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	170 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	160 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	12 / 15	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.8 / 4.1	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	1600 / 1600	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1500 / 1900	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E10 / 1E9	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 2E13	Ohm	IEC 60093
電氣強度(Electric strength)	32 / 30	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸濕性(Humidity absorption)	0.5 / *	%	Sim. to ISO 62
密度(Density)	1030 / 1030	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	230	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection molding1 %The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer dur1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer du1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer du ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-101055.html

免責聲明: 本文 VESTAMID? L2124 blk (sw) 9.7507|PA12|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡