色呦呦国产精品,аⅴ天堂中文在线网,亚洲色大成网站www永久男同,av无码精品一区二区乱子,狠狠躁夜夜躁无码中文字幕

VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries

VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries 物性表: VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries物性表及特性介紹,VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries注塑參數詳情,如需VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries下載, 可到相關下載區下載

Product TextsVESTAMID? LX9013 blk These tubes are permanently exposed to higher temperatures, e.g. in the engine compartment ofDIN 74324 (black), ISO 7628 and SAE J844.4 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.5 / *	%	ISO 294-4, 2577

[tr][/tr][tr][/tr]

機械性能(機械性能(Mechanical properties))

dry / cond

單位(Unit)

測試標準(Test Standard)

ISO數據(ISO數據(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

410 / -

MPa

ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C)

N / -

kJ/m2

ISO 179/1eU

簡支梁沖擊強度(Charpy impact strength) (-30°C)

N / -

kJ/m2

ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)

140[P] / -

kJ/m2

ISO 179/1eA

簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)

7 / -

kJ/m2

ISO 179/1eA

Partial Break

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	172 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	55 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	130 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	130 / *	°C	ISO 306
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	12 / -	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.4 / -	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	5000 / -	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1000 / -	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E8 / -	Ohm*m	IEC 60093
電氣強度(Electric strength)	25 / -	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / -	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸濕性(Humidity absorption)	0.6 / *	%	Sim. to ISO 62
密度(Density)	1020 / 1020	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingProfile ExtrusionDelivery formPelletsAdditivesPlasticizerSpecial CharacteristicsHigh impact or impact modified, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationProfile extrusionPREPROCESSING INFORMATION1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-101048.html

免責聲明: 本文 VESTAMID? LX9013 blk (sw)|PA12-I|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡