国产亚洲tv在线观看,在线日韩日本国产亚洲,成人福利国产午夜AV免费不卡在线,久久精品女人的天堂av,亚洲国产成人精品av区按摩

Product TextsVESTAMID? L-GF30 nc1 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	6500 / 5500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	* / 110	MPa	ISO 527-1/-2
屈服應變(Yield strain)	* / 5	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	* / 5.5	%	ISO 527-1/-2
破壞時應變(Stress at break)	120 / *	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	5 / *	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	85 / 75	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	100 / 95	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	23 / 24	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	21 / 22	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	165 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	175 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	175 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	60 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	70 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.1 / 5	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.4 / 4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	310 / 600	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	330 / 400	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13 / 2E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / >1E15	Ohm	IEC 60093
電氣強度(Electric strength)	44 / 45	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.1 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.5 / *	%	Sim. to ISO 62
密度(Density)	1240 / 1240	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1090	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.28	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2400	J/(kg K)	-
噴射溫度(Ejection temperature)	180	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependent on the drying temperature. At a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during drying. ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? L-GF30 nc (nf)|PA12-GF30|Evonik Industries