人妻av一区二区三区av免费,久久精品国产亚洲精品,国产精品香蕉在线观看不卡 ,人妻中文字幕在线视频无码 ,99精品久久精品

Product TextsProperties of compounds based on Polyamide 12 vary little with changingParts made of this semicrystalline material are charac-9	cm3/10min	ISO 1133
溫度(Temperature)	275	°C	ISO 1133
負載(Load)	5	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	400	MPa	ISO 527-1/-2
屈服應力(Yield stress)	27	MPa	ISO 527-1/-2
屈服應變(Yield strain)	32	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	N	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	7	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	45	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	100	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	130	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	180	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	180	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	11	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4.6	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	1800	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1900	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
電氣強度(Electric strength)	30	kV/mm	IEC 60243-1

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸濕性(Humidity absorption)	0.6	%	Sim. to ISO 62
密度(Density)	1020	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationOther extrusion1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the water Fresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer dur1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the water Fresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plastic ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? X7293 blk (sw)|PA12-I|Evonik Industries