欧美丰满熟妇xxxx性ppx人交,二区三区国产在线观看,av新版天堂在线观看,久久国产精品77777,2020国产欧洲精品网站

VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries

VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries 物性表: VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries物性表及特性介紹,VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries注塑參數詳情,如需VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries下載, 可到相關下載區下載

Product TextsVESTAMID? LX9012 nc Decoration on the bottom side of injection molded sports shoe soles0 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.4 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1100 / -	MPa	ISO 527-1/-2
屈服應力(Yield stress)	37 / -	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5 / -	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50 / -	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / -	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	19 / -	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	15 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	176 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	45 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	120 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	130 / *	°C	ISO 306
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.8 / -	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3 / -	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	530 / -	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	280 / -	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12 / -	Ohm*m	IEC 60093
電氣強度(Electric strength)	36 / -	kV/mm	IEC 60243-1

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.8 / *	%	Sim. to ISO 62
密度(Density)	1010 / -	kg/m3	ISO 1183

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile ExtrusionDelivery formPelletsSpecial CharacteristicsLight stabilized or stable to light, Heat stabilized or stable to heat, TransparentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING INFORMATION1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-101038.html

免責聲明: 本文 VESTAMID? LX9012 nc (nf)|PA12|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡