视频二区国产精品职场同事,AV秘无码一区二,九九re线精品视频在线观看视频,潘金莲高清dvd碟片,久久综合干

7504 \| PA12 \| Evonik Industries Product TextsVESTAMID? L2140 blk 9.7504 EG Standard 93/128. of deflection under load (1.80 MPa)	50 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	110 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	140 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	140 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.7 / 4.8	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3 / 3.3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	450 / 700	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	260 / 500	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 3E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E15	Ohm	IEC 60093
電氣強度(Electric strength)	26 / -	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	* / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.7 / *	%	Sim. to ISO 62
密度(Density)	1010 / 1010	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	860	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.2	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	3000	J/(kg K)	-
噴射溫度(Ejection temperature)	170	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingInjection Molding, Profile Extrusion, Other ExtrusionDelivery formPelletsAdditivesLubricantsSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection molding1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer du1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? L2140 blk (sw) 9.7504|PA12|Evonik Industries