69精品丰满人妻无码视频a片,亚洲人成网线在线播放VA,野外少妇被弄到喷水在线观看,精品尤物TV福利院在线网站 ,中文无码热在线视频

VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries

VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries 物性表: VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries物性表及特性介紹,VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries注塑參數詳情,如需VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries下載, 可到相關下載區下載

Product TextsVESTAMID? L-R9-MHI blk4	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.4	%	ISO 294-4, 2577

[tr][/tr][tr][/tr]

機械性能(機械性能(Mechanical properties))

值(Value)

單位(Unit)

測試標準(Test Standard)

ISO數據(ISO數據(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

1400

MPa

ISO 527-1/-2

屈服應力(Yield stress)

MPa

ISO 527-1/-2

屈服應變(Yield strain)

ISO 527-1/-2

斷裂拉伸應變(Nominal strain at break)

>50

ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C)

kJ/m2

ISO 179/1eU

簡支梁沖擊強度(Charpy impact strength) (-30°C)

kJ/m2

ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)

60[P]

kJ/m2

ISO 179/1eA

簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)

kJ/m2

ISO 179/1eA

Partial Break

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	178	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	50	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	130	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
體積電阻率(Volume resistivity)	1E7	Ohm*m	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.7	%	Sim. to ISO 62
密度(Density)	1080	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

CharacteristicsProcessingInjection MoldingDelivery formPelletsAdditivesLubricants, Release agentSpecial CharacteristicsIncreased electrical conductivity, Anti-static, High impact or impact modified, Light stabilized or stable to light, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING INFORMATION1 % The drying time is dependent on the drying temperature. At a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during drying. ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-101028.html

免責聲明: 本文 VESTAMID? L-R9-MHI blk (sw)|PA12-I|Evonik Industries 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡