加勒比无码人妻东京热,中文字幕乱码人妻二区三区,久久国产成人午夜av影院,99久久亚洲综合精品成人网,国产精品亚洲片在线观看麻豆

7504 \| PA12 \| Evonik Industries Product TextsVESTAMID? L2141 blk 9.75047 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.3 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1500 / 1300	MPa	ISO 527-1/-2
屈服應力(Yield stress)	46 / 42	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5 / 12	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50 / >50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	10 / 12	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	8 / 8	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	50 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	110 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	150 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	140 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	9.7 / 5	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4 / 3.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	2100 / 1000	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	1100 / 500	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E10 / 5E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 6E14	Ohm	IEC 60093
電氣強度(Electric strength)	35 / 35	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.5 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.7 / *	%	Sim. to ISO 62
密度(Density)	1010 / 1020	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer du1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? L2141 blk (sw) 9.7504|PA12|Evonik Industries