久久波多野结衣av,最新日韩精品视频在线,黑色丝袜脚交视频麻豆,国产亚洲一二三区精品,大桥未久亚洲无av码在线

Product TextsVESTAMID? L1833 nc2 mm) NC, UL 746 B, RTI=110/100/100°C2 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.7 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	5000 / 4800	MPa	ISO 527-1/-2
屈服應力(Yield stress)	* / 95	MPa	ISO 527-1/-2
屈服應變(Yield strain)	* / 5	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	* / 6.5	%	ISO 527-1/-2
破壞時應變(Stress at break)	105 / *	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	6 / *	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 5000	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 3700	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	90 / 70	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	95 / 75	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	25 / 23	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	16 / 17	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	178 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	160 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	175 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	175 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	70 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	80 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.1 / 5	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.4 / 4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	370 / 700	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	260 / 450	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13 / 2E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / >1E15	Ohm	IEC 60093
電氣強度(Electric strength)	41 / 45	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.2 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.6 / *	%	Sim. to ISO 62
密度(Density)	1170 / 1170	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1080	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.26	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2640	J/(kg K)	-
噴射溫度(Ejection temperature)	180	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	70	MPa	ISO 294

Diagrams1 % The drying time is dependentAt a drying temperature of 80°C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer du ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? L1833 nc (nf)|PA12-GF23|Evonik Industries