- 密度 [g/cm3]: 1.4
- 吸水率 [%]: 0.06
- 缺口沖擊強(qiáng)度: 0.5
- 彎曲模量 [MPa]: 7.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.40 g/cc | 0.0506 lb/in3 | Crystalline; ISO 1183 |
| Water Absorption | 0.060 % @Temperature 23.0 °C, Time 86400 sec | 0.060 % @Temperature 73.4 °F, Time 24.0 hour | 3.2mm thick tensile bar; ISO 62-1 |
| Water Absorption at Saturation | 0.40 % @Temperature 23.0 °C | 0.40 % @Temperature 73.4 °F | Equilibrium; by immersion; ISO 62-1 |
| Viscosity | 210000 cP @Temperature 400 °C | 210000 cP @Temperature 752 °F | melt; ISO 11443 |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm | 0.0040 in/in | 360°C nozzle, 160°C tool; ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.010 cm/cm | 0.010 in/in | 375°C nozzle, 180°C tool; ISO 294-4 |
| Spiral Flow | 180 cm @Thickness 1.00 mm | 70.9 in @Thickness 0.0394 in | 375°C nozzle, 180°C tool |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 89 @Temperature 23.0 °C | 89 @Temperature 73.4 °F | ISO 868 |
| Tensile Strength at Break | 135 MPa @Temperature 23.0 °C | 19600 psi @Temperature 73.4 °F | ISO 527 |
| Elongation at Break | 2.3 % @Temperature 23.0 °C | 2.3 % @Temperature 73.4 °F | ISO 527 |
| Tensile Modulus | 7.50 GPa @Temperature 23.0 °C | 1090 ksi @Temperature 73.4 °F | ISO 527 |
| Flexural Strength | 220 MPa @Temperature 23.0 °C | 31900 psi @Temperature 73.4 °F | ISO 178 |
| Flexural Modulus | 7.50 GPa @Temperature 23.0 °C | 1090 ksi @Temperature 73.4 °F | ISO 178 |
| Izod Impact, Notched (ISO) | 0.500 kJ/m2 @Temperature 23.0 °C | 0.238 ft-lb/in2 @Temperature 73.4 °F | ISO 180/A |
| Izod Impact, Unnotched (ISO) | 3.00 kJ/m2 @Temperature 23.0 °C | 1.43 ft-lb/in2 @Temperature 73.4 °F | ISO 180/U |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | IEC 60093 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 30.0 μm/m-°C @Temperature <=143 °C | 16.7 μin/in-°F @Temperature <=289 °F | Along flow below Tg; ISO 11359 |
| 30.0 μm/m-°C @Temperature >=143 °C | 16.7 μin/in-°F @Temperature >=289 °F | Along flow above Tg; ISO 11359 | |
| 55.0 μm/m-°C @Temperature <=143 °C | 30.6 μin/in-°F @Temperature <=289 °F | Average below Tg; ISO 11359 | |
| 120 μm/m-°C @Temperature >=143 °C | 66.7 μin/in-°F @Temperature >=289 °F | Average above Tg; ISO 11359 | |
| Specific Heat Capacity | 1.70 J/g-°C @Temperature 23.0 °C | 0.406 BTU/lb-°F @Temperature 73.4 °F | DSC |
| Thermal Conductivity | 0.300 W/m-K @Temperature 23.0 °C | 2.08 BTU-in/hr-ft2-°F @Temperature 73.4 °F | ISO/CD 22007-4 |
| Melting Point | 343 °C | 649 °F | ISO 11357 |
| Deflection Temperature at 1.8 MPa (264 psi) | 323 °C | 613 °F | ISO 75-f |
| Glass Transition Temp, Tg | 143 °C | 289 °F | Onset; ISO 11357 |
| Flammability, UL94 | V-0 @Thickness 0.500 mm | V-0 @Thickness 0.0197 in | |
| Processing Properties | Metric | English | Comments |
| Mold Temperature | 170 - 200 °C | 338 - 392 °F | |
| Drying Temperature | 120 °C @Time 18000 sec | 248 °F @Time 5.00 hour | |
| 150 °C @Time 10800 sec | 302 °F @Time 3.00 hour | ||