- 密度 [g/cm3]: 1.31
- 吸水率 [%]: 0.1
- 缺口沖擊強度: 0.267
- 斷裂伸長率 [%]: 85.0
- 彎曲強度 [MPa]: 75.0
- 彎曲模量 [MPa]: 2.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.31 - 1.50 g/cc | 0.0473 - 0.0542 lb/in3 | Average value: 1.37 g/cc Grade Count:12 |
| Filler Content | 15.0 % | 15.0 % | Average value: 15.0 % Grade Count:3 |
| Water Absorption | 0.100 - 0.200 % | 0.100 - 0.200 % | Average value: 0.157 % Grade Count:3 |
| Linear Mold Shrinkage | 0.000500 - 0.0150 cm/cm | 0.000500 - 0.0150 in/in | Average value: 0.00894 cm/cm Grade Count:12 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 75.0 - 193 MPa | 10900 - 28000 psi | Average value: 95.3 MPa Grade Count:12 |
| Elongation at Break | 1.00 - 6.00 % | 1.00 - 6.00 % | Average value: 3.20 % Grade Count:11 |
| Modulus of Elasticity | 3.70 - 20.7 GPa | 537 - 3000 ksi | Average value: 6.62 GPa Grade Count:12 |
| Flexural Yield Strength | 85.0 - 276 MPa | 12300 - 40000 psi | Average value: 153 MPa Grade Count:12 |
| Flexural Modulus | 2.50 - 22.8 GPa | 363 - 3300 ksi | Average value: 6.45 GPa Grade Count:12 |
| Izod Impact, Notched | 0.267 - 0.641 J/cm | 0.500 - 1.20 ft-lb/in | Average value: 0.437 J/cm Grade Count:11 |
| Izod Impact, Unnotched | 2.67 - 6.41 J/cm | 5.00 - 12.0 ft-lb/in | Average value: 4.25 J/cm Grade Count:11 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 10000 - 1.00e+16 ohm-cm | 10000 - 1.00e+16 ohm-cm | Average value: 4.21e+15 ohm-cm Grade Count:6 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 163 - 260 °C | 325 - 500 °F | Average value: 197 °C Grade Count:7 |
| Flammability, UL94 | V-0 | V-0 | Grade Count:9 |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 343 - 390 °C | 650 - 734 °F | Average value: 370 °C Grade Count:5 |
| Melt Temperature | 349 - 400 °C | 660 - 752 °F | Average value: 376 °C Grade Count:8 |
| Mold Temperature | 163 - 218 °C | 325 - 425 °F | Average value: 190 °C Grade Count:12 |
| Drying Temperature | 120 - 150 °C | 248 - 302 °F | Average value: 146 °C Grade Count:8 |
| Dry Time | 3.00 hour | 3.00 hour | Average value: 3.00 hour Grade Count:3 |
| Moisture Content | 0.100 % | 0.100 % | Average value: 0.100 % Grade Count:7 |
| Dew Point | -28.9 °C | -20.0 °F | Average value: -28.9 °C Grade Count:7 |
| Injection Pressure | 82.7 - 124 MPa | 12000 - 18000 psi | Average value: 103 MPa Grade Count:11 |