- 密度 [g/cm3]: 1.06
- 缺口沖擊強度: 5.0
- 拉伸強度 [MPa]: 58.0
- 彎曲模量 [MPa]: 2.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.06 g/cc | 0.0383 lb/in3 | DAM; ISO 1183 | ||
| Linear Mold Shrinkage, Flow | 0.013 cm/cm @Thickness 2.00 mm | 0.013 in/in @Thickness 0.0787 in | Parallel; DAM; ISO 294-4 | ||
| Linear Mold Shrinkage, Transverse | 0.013 cm/cm @Thickness 2.00 mm | 0.013 in/in @Thickness 0.0787 in | Normal; DAM; ISO 294-4 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 58.0 MPa @Temperature 23.0 °C | 8410 psi @Temperature 73.4 °F | DAM; ISO 527 | ||
| Tensile Modulus | 2.25 GPa @Temperature 23.0 °C | 326 ksi @Temperature 73.4 °F | DAM; ISO 527 | ||
| Flexural Modulus | 2.00 GPa @Temperature 23.0 °C | 290 ksi @Temperature 73.4 °F | DAM; ISO 178 | ||
| Izod Impact, Notched (ISO) | 5.00 kJ/m2 @Temperature 23.0 °C | 2.38 ft-lb/in2 @Temperature 73.4 °F | DAM; ISO 180/1A | ||
| Thermal Properties | Metric | English | Comments | ||
| Melting Point | 220 °C | 428 °F | DAM; ASTM D3418 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 56.0 °C | 133 °F | DAM; ISO 75-1/-2 | ||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 230 - 240 °C | 446 - 464 °F | DAM; Extrusion | ||
| 235 °C | 455 °F | DAM; Optimum; Extrusion | |||
| 250 °C | 482 °F | DAM; Optimum; Injection Molding | |||
| 230 - 290 °C | 446 - 554 °F | DAM; Injection Molding | |||
| Mold Temperature | 50.0 - 90.0 °C | 122 - 194 °F | DAM; Injection Molding | ||
| 80.0 °C | 176 °F | DAM; optimum; Injection Molding | |||
| Drying Temperature | 80.0 °C | 176 °F | DAM; Injection Molding | ||
| 80.0 °C | 176 °F | DAM; Extrusion | |||
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | DAM; Injection Molding | ||
| 4.00 - 6.00 hour | 4.00 - 6.00 hour | DAM; Extrusion | |||
| Moisture Content | <= 0.050 % | <= 0.050 % | DAM; Injection Molding | ||
| <= 0.050 % | <= 0.050 % | DAM; Extrusion | |||
| Descriptive Properties | |||||
| Appearance | Natural Color | DAM | |||
| Forms | Pellets | DAM | |||
| Generic | Nylon 612 | DAM | |||
| Material Status | Preliminary Data | DAM | |||
| Part Marking Code | >PA612< | ISO 11469; DAM | |||
| Processing Method | Extrusion | DAM | |||
| Product Category | Extrusion Resins | DAM | |||
| Region Available - Global | Yes | DAM | |||
| Resin Identification | PA612 | ISO 1043; DAM | |||
| RoHS Compliance | Contact Manufacturer | DAM | |||