- 密度 [g/cm3]: 1.24
- 吸水率 [%]: 0.12
- 缺口沖擊強度: 1.55
- 拉伸強度 [MPa]: 108.0
- 彎曲模量 [MPa]: 5.52
- 熱變形溫度 [℃]: 138.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.24 g/cc | 0.0448 lb/in3 | ASTM D792 |
| Water Absorption | 0.12 % @Time 86400 sec | 0.12 % @Time 24.0 hour | ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.0040 cm/cm @Thickness 3.17 mm | 0.0040 in/in @Thickness 0.125 in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Yield | 108 MPa | 15600 psi | ASTM D638 |
| Elongation at Break | 3.0 % | 3.0 % | ASTM D638 |
| Flexural Strength | 150 MPa | 21700 psi | ASTM D790 |
| Flexural Modulus | 5.52 GPa | 800 ksi | ASTM D790 |
| Izod Impact, Notched | 1.55 J/cm @Thickness 3.17 mm | 2.90 ft-lb/in @Thickness 0.125 in | ASTM D256 |
| Izod Impact, Unnotched | NB | NB | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Dielectric Strength | 17.7 kV/mm | 450 kV/in | Method A (Short-Time); ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 41.4 μm/m-°C | 23.0 μin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 138 °C | 280 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | Unannealed; ASTM D648 |