2020精品自拍视频曝光,亚洲伊人精品久视频国产,国产a在亚洲线播放,欧美日产国产精品日产,丁香婷婷综合激情五月色

DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)

DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry) 物性表: DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)物性表及特性介紹,DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)注塑參數詳情,如需DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)下載, 可到相關下載區下載

密度 [g/cm3]: 1.56
吸水率 [%]: 6.0
熱變形溫度 [℃]: 205.0

Physical Properties	Metric	English	Comments

Density	1.56 g/cc	0.0564 lb/in3	ISO 1183
Water Absorption	6.0 %	6.0 %	Sim. to ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	Humidity Absorption; Sim. to ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	75.0 MPa	10900 psi	ISO 527-1/-2
Elongation at Break	2.5 %	2.5 %	ISO 527-1/-2
Tensile Modulus	8.00 GPa	1160 ksi	ISO 527-1/-2
Charpy Impact Unnotched	4.00 J/cm2 @Temperature -30.0 °C	19.0 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	4.00 J/cm2 @Temperature 23.0 °C	19.0 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	0.500 J/cm2 @Temperature -30.0 °C	2.38 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eA
	0.500 J/cm2 @Temperature 23.0 °C	2.38 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	IEC 60093
Dielectric Constant	3.2 @Frequency 1e+6 Hz	3.2 @Frequency 1e+6 Hz	IEC 60250
	3.6 @Frequency 100 Hz	3.6 @Frequency 100 Hz	IEC 60250
Dielectric Strength	30.0 kV/mm	762 kV/in	IEC 60243-1
Dissipation Factor	0.0085 @Frequency 100 Hz	0.0085 @Frequency 100 Hz	IEC 60250
	0.014 @Frequency 1e+6 Hz	0.014 @Frequency 1e+6 Hz	IEC 60250
Comparative Tracking Index	300 V	300 V	IEC 60112
	250 - 399 V	250 - 399 V	PLC 2; UL 746A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	50.0 μm/m-°C @Temperature 20.0 °C	27.8 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	50.0 μm/m-°C @Temperature 20.0 °C	27.8 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
Melting Point	220 °C	428 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	205 °C	401 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	140 °C	284 °F	ISO 75-1/-2
UL RTI, Electrical	140 °C @Thickness 1.50 mm	284 °F @Thickness 0.0591 in	UL746B
	140 °C @Thickness 3.00 mm	284 °F @Thickness 0.118 in	UL746B
UL RTI, Mechanical with Impact	110 °C @Thickness 1.50 mm	230 °F @Thickness 0.0591 in	UL746B
	120 °C @Thickness 3.00 mm	248 °F @Thickness 0.118 in	UL746B
UL RTI, Mechanical without Impact	140 °C @Thickness 1.50 mm	284 °F @Thickness 0.0591 in	UL746B
	140 °C @Thickness 3.00 mm	284 °F @Thickness 0.118 in	UL746B
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	IEC 60695-11-10
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in	IEC 60695-11-10
Glow Wire Test	960 °C @Thickness 1.50 mm	1760 °F @Thickness 0.0591 in	Glow Wire Flammability Index; IEC 60695-2-12

Processing Properties	Metric	English	Comments
Melt Temperature	220 °C	428 °F	10°C/min; ISO 11357-1/-3

Descriptive Properties
Flame Retardant	Yes
Flame Retarding Agent	Yes
Heat Stabilized or Stable to Heat	Yes
Injection Molding	Yes
Release Agent	Yes
With Fillers	Yes

關鍵詞:
供應
PA6
DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-46645.html

免責聲明: 本文 DSM Akulon? K223-HMS6 Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡