精品国产性色av网站,韩国av无码,亚洲国产精品人人做人人爱,亚洲一区二区三区,九九日本黄色精品视频

DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry)

DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry) 物性表: DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry)物性表及特性介紹,DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry)注塑參數詳情,如需DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry)下載, 可到相關下載區下載

密度 [g/cm3]: 1.27
吸水率 [%]: 7.2
熱變形溫度 [℃]: 215.0

Physical Properties	Metric	English	Comments

Density	1.27 g/cc	0.0459 lb/in3	ISO 1183
Water Absorption	7.2 %	7.2 %	Sim. to ISO 62
Moisture Absorption at Equilibrium	2.15 %	2.15 %	Humidity Absorption; Sim. to ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	140 MPa	20300 psi	ISO 527-1/-2
Elongation at Break	3.5 %	3.5 %	ISO 527-1/-2
Tensile Modulus	7.30 GPa	1060 ksi	ISO 527-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+14 ohm-cm	5.00e+14 ohm-cm	IEC 60093
Dielectric Constant	4.0 @Frequency 1e+6 Hz	4.0 @Frequency 1e+6 Hz	IEC 60250
	4.3 @Frequency 100 Hz	4.3 @Frequency 100 Hz	IEC 60250
Dissipation Factor	0.0060 @Frequency 100 Hz	0.0060 @Frequency 100 Hz	IEC 60250
	0.016 @Frequency 1e+6 Hz	0.016 @Frequency 1e+6 Hz	IEC 60250
Comparative Tracking Index	475 V	475 V	IEC 60112
	400 - 599 V	400 - 599 V	PLC 1; UL 746A

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	30.0 μm/m-°C @Temperature 20.0 °C	16.7 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	75.0 μm/m-°C @Temperature 20.0 °C	41.7 μin/in-°F @Temperature 68.0 °F	ISO 11359-1/-2
Melting Point	220 °C	428 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	215 °C	419 °F	ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75-1/-2
UL RTI, Electrical	140 °C @Thickness 1.50 mm	284 °F @Thickness 0.0591 in	UL746B
	140 °C @Thickness 0.710 mm	284 °F @Thickness 0.0280 in	UL746B
UL RTI, Mechanical with Impact	120 °C @Thickness 0.710 mm	248 °F @Thickness 0.0280 in	UL746B
	125 °C @Thickness 1.50 mm	257 °F @Thickness 0.0591 in	UL746B
UL RTI, Mechanical without Impact	140 °C @Thickness 0.710 mm	284 °F @Thickness 0.0280 in	UL746B
	150 °C @Thickness 1.50 mm	302 °F @Thickness 0.0591 in	UL746B
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in	IEC 60695-11-10
	HB @Thickness 0.710 mm	HB @Thickness 0.0280 in	IEC 60695-11-10

Descriptive Properties
Heat Stabilized or Stable to Heat	Yes
Injection Molding	Yes
Release Agent	Yes
With Fillers	Yes

關鍵詞:
供應
PA6
DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-46638.html

免責聲明: 本文 DSM Akulon? K224-HG4 Nylon 6-20% Glass Reinforced (European Grade) (Dry) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡