久久精产国品一二三产品,精品国产AⅤ无码一区二区,亚洲AV无码一区二区一二区色戒,国产精品久久久久无码网站,人妻少妇精品性色av蜜桃

DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond)

DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond) 物性表: DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond)物性表及特性介紹,DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond)注塑參數詳情,如需DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond)下載, 可到相關下載區下載

密度 [g/cm3]: 1.56
吸水率 [%]: 4.5

Physical Properties	Metric	English	Comments

Density	1.56 g/cc	0.0564 lb/in3	(DAM); ISO 1183
Water Absorption	4.5 %	4.5 %	DAM; Sim. to ISO 62
Moisture Absorption at Equilibrium	1.4 %	1.4 %	Humidity Absorption (DAM); Sim. to ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	160 MPa	23200 psi	ISO 527-1/-2
Elongation at Break	3.5 %	3.5 %	ISO 527-1/-2
Tensile Modulus	12.0 GPa	1740 ksi	ISO 527-1/-2
Charpy Impact Unnotched	8.50 J/cm2 @Temperature -30.0 °C	40.5 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eU
	10.5 J/cm2 @Temperature 23.0 °C	50.0 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eU
Charpy Impact, Notched	1.50 J/cm2 @Temperature -30.0 °C	7.14 ft-lb/in2 @Temperature -22.0 °F	ISO 179/1eA
	2.50 J/cm2 @Temperature 23.0 °C	11.9 ft-lb/in2 @Temperature 73.4 °F	ISO 179/1eA

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	4.5 @Frequency 1e+6 Hz	4.5 @Frequency 1e+6 Hz	IEC 60250
	14 @Frequency 100 Hz	14 @Frequency 100 Hz	IEC 60250
Dielectric Strength	25.0 kV/mm	635 kV/in	IEC 60243-1
Dissipation Factor	0.12 @Frequency 1e+6 Hz	0.12 @Frequency 1e+6 Hz	IEC 60250
	0.30 @Frequency 100 Hz	0.30 @Frequency 100 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112
	>= 600 V	>= 600 V	PLC 0; UL 746A

Thermal Properties	Metric	English	Comments
Melting Point	220 °C	428 °F	10°C/min (DAM); ISO 11357-1/-3
UL RTI, Electrical	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL746B
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL746B
UL RTI, Mechanical with Impact	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL746B
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL746B
UL RTI, Mechanical without Impact	65.0 °C @Thickness 1.50 mm	149 °F @Thickness 0.0591 in	UL746B
	65.0 °C @Thickness 3.00 mm	149 °F @Thickness 0.118 in	UL746B

Descriptive Properties
Injection Molding	Yes
Release Agent	Yes
With Fillers	Yes

關鍵詞:
供應
PA6
DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-46640.html

免責聲明: 本文 DSM Akulon? K224-G0 Nylon 6-50% Glass Reinforced (European Grade) (Cond) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡