- 密度 [g/cm3]: 1.15
- 吸水率 [%]: 0.5
- 缺口沖擊強度: 0.5
- 斷裂伸長率 [%]: 86.0
- 彎曲強度 [MPa]: 70.0
- 彎曲模量 [MPa]: 2.30
- 硬度: 112.0
- 熱變形溫度 [℃]: 204.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in3 | ASTM D792 |
| Water Absorption | 0.50 % | 0.50 % | 24 hrs; ASTM D570 |
| Water Absorption at Saturation | 5.5 % | 5.5 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell R | 112 | 112 | ASTM D785 |
| Hardness, Shore D | 77 | 77 | ASTM D2240 |
| Tensile Strength, Ultimate | 70.0 MPa | 10200 psi | ASTM D638 |
| Elongation at Break | 25 - 35 % | 25 - 35 % | ASTM D638 |
| Tensile Modulus | 2.80 GPa | 406 ksi | ASTM D638 |
| Flexural Yield Strength | 86.0 MPa | 12500 psi | ASTM D790 |
| Flexural Modulus | 2.30 GPa | 334 ksi | ASTM D790 |
| Compressive Yield Strength | 162 MPa | 23500 psi | 10% Offset; ASTM D695 |
| Compressive Modulus | 1.80 GPa | 261 ksi | ASTM D695 |
| Shear Strength | 72.0 MPa | 10400 psi | ASTM D732 |
| Izod Impact, Notched | 0.500 J/cm | 0.937 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Dielectric Constant | 3.7 @Frequency 60 Hz | 3.7 @Frequency 60 Hz | |
| 3.7 @Frequency 1000 Hz | 3.7 @Frequency 1000 Hz | ||
| 3.7 @Frequency 100000 Hz | 3.7 @Frequency 100000 Hz | ASTM D150 | |
| Dielectric Strength | 22.0 kV/mm | 559 kV/in | Short time; ASTM D149 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 81.0 μm/m-°C @Temperature 20.0 °C | 45.0 μin/in-°F @Temperature 68.0 °F | ASTM D696 |
| Melting Point | 226 - 238 °C | 439 - 460 °F | ASTM D789 |
| Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous service |
| 166 °C | 331 °F | Intermittent service | |
| Deflection Temperature at 0.46 MPa (66 psi) | 204 - 221 °C | 399 - 430 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 166 - 204 °C | 331 - 399 °F | ASTM D648 |