- 密度 [g/cm3]: 1.14
- 缺口沖擊強度: 75.0
- 彎曲模量 [MPa]: 1.00
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in3 | ISO 1183/A |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 45.0 MPa | 6530 psi | ISO 527 Type 1A |
| Elongation at Break | 270 % | 270 % | ISO 527 Type 1A |
| Tensile Modulus | 1.10 GPa | 160 ksi | ISO 527 Type 1A |
| Flexural Strength | 40.0 MPa | 5800 psi | ISO 178 |
| Flexural Modulus | 1.00 GPa | 145 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 75.0 kJ/m2 | 35.7 ft-lb/in2 | ISO 180/1eA |
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU |
| Charpy Impact, Notched | 8.40 J/cm2 | 40.0 ft-lb/in2 | ISO 179/1eA |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | IEC 60093 |
| Dielectric Constant | 3.9 | 3.9 | IEC 60250 |
| Dielectric Strength | 18.0 kV/mm | 457 kV/in | IEC 60243 |
| Dissipation Factor | 0.10 | 0.10 | IEC 60250 |
| Processing Properties | Metric | English | Comments |
| Moisture Content | <= 0.20 % | <= 0.20 % | |