- 密度 [g/cm3]: 1.37
- 吸水率 [%]: 2.4
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.37 g/cc | 0.0495 lb/in3 | ISO 1183 | ||
| Water Absorption | 2.4 % | 2.4 % | ISO 62 | ||
| Moisture Absorption | 1.00 % | 1.00 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0050 cm/cm | 0.0050 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0080 cm/cm | 0.0080 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 210 MPa | 30500 psi | dry; ISO 2039-1 | ||
| 210 MPa | 30500 psi | conditioned; ISO 2039-1 | |||
| Tensile Strength at Break | 165 MPa | 23900 psi | conditioned; ISO 527-1/-2 | ||
| 180 MPa | 26100 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.8 % | 2.8 % | conditioned; ISO 527-1/-2 | ||
| 3.0 % | 3.0 % | dry; ISO 527-1/-2 | |||
| Tensile Modulus | 9.50 GPa | 1380 ksi | conditioned; ISO 527-1/-2 | ||
| 9.50 GPa | 1380 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 7.00 J/cm2 | 33.3 ft-lb/in2 | conditioned; ISO 179/1eU | ||
| 8.00 J/cm2 | 38.1 ft-lb/in2 | dry; ISO 179/1eU | |||
| 6.00 J/cm2 @Temperature 30.0 °C | 28.6 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 7.00 J/cm2 @Temperature 30.0 °C | 33.3 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.00 J/cm2 | 4.76 ft-lb/in2 | dry; ISO 179/1eA | ||
| 1.00 J/cm2 | 4.76 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.800 J/cm2 @Temperature 30.0 °C | 3.81 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 | ||
| Dielectric Strength | 37.0 kV/mm | 940 kV/in | conditioned; IEC 60243-1 | ||
| 38.0 kV/mm | 965 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 70.0 μm/m-°C | 38.9 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 295 °C | 563 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | long term; EMS | ||
| 250 °C | 482 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 150 °C | 302 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | IEC 60695-11-10 | |||
| Descriptive Properties | |||||
| Automotive | Automotive electr. and electronics, lighting | ||||
| Interior | |||||
| Electricals & Electronics | Electrical appliances | ||||
| Lighting | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Hydraulics & Pneumatics | ||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Product Attributes | Co Polyamide | ||||
| Improved alcohol resistance | |||||
| Improved flowability and demoulding | |||||
| Partially aromatic Polyamide | |||||
| Special Characteristics | Flame retardant | ||||
| Improved heat resistance | |||||