- 密度 [g/cm3]: 1.44
- 吸水率 [%]: 5.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.44 g/cc | 0.0520 lb/in3 | ISO 1183 | ||
| Water Absorption | 5.0 % | 5.0 % | ISO 62 | ||
| Moisture Absorption | 2.00 % | 2.00 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.0010 cm/cm | 0.0010 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 240 MPa | 34800 psi | conditioned; ISO 2039-1 | ||
| 260 MPa | 37700 psi | dry; ISO 2039-1 | |||
| Tensile Strength at Break | 180 MPa | 26100 psi | conditioned; ISO 527-1/-2 | ||
| 200 MPa | 29000 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | 2.5 % | 2.5 % | dry; ISO 527-1/-2 | ||
| 2.5 % | 2.5 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 11.0 GPa | 1600 ksi | conditioned; ISO 527-1/-2 | ||
| 11.0 GPa | 1600 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | 5.50 J/cm2 | 26.2 ft-lb/in2 | dry; ISO 179/1eU | ||
| 5.50 J/cm2 | 26.2 ft-lb/in2 | conditioned; ISO 179/1eU | |||
| 4.50 J/cm2 @Temperature 30.0 °C | 21.4 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| 5.00 J/cm2 @Temperature 30.0 °C | 23.8 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| Charpy Impact, Notched | 1.00 J/cm2 | 4.76 ft-lb/in2 | dry; ISO 179/1eA | ||
| 1.00 J/cm2 | 4.76 ft-lb/in2 | conditioned; ISO 179/1eA | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 0.900 J/cm2 @Temperature 30.0 °C | 4.28 ft-lb/in2 @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
| 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | IEC 60093 | ||
| Dielectric Strength | 37.0 kV/mm | 940 kV/in | conditioned; IEC 60243-1 | ||
| 38.0 kV/mm | 965 kV/in | dry; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 μm/m-°C | 11.1 μin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 60.0 μm/m-°C | 33.3 μin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 310 °C | 590 °F | 10°C/min; ISO 11357-1/-3 | ||
| Maximum Service Temperature, Air | 140 °C | 284 °F | long term; EMS | ||
| 240 °C | 464 °F | short term; EMS | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 285 °C | 545 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 8.0 MPa | 200 °C | 392 °F | ISO 75-1/-2 | ||
| Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
| Descriptive Properties | |||||
| Automotive | Automotive electr. and electronics, lighting | ||||
| Exterior | |||||
| Fuel systems | |||||
| Interior | |||||
| Powertrain and Chassis | |||||
| Electricals & Electronics | Connectors | ||||
| Electrical equipment | |||||
| Form | Granules | ||||
| Industry & Consumer goods | Housewares | ||||
| Hydraulics & Pneumatics | |||||
| Mechanical Engineering | |||||
| Power transmission | |||||
| Sports & Leisure | |||||
| Tools & Accessories | |||||
| Processing | Injection Molding | ||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||
| Improved UV resistance (outdoor use) | |||||