- 密度 [g/cm3]: 2.05
- 缺口沖擊強度: 8.5
- 彎曲強度 [MPa]: 10.8
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.05 - 2.15 g/cc | 0.0741 - 0.0777 lb/in3 | ASTM D792 |
| Deformation | 0.40 - 2.1 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 0.40 - 2.1 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | permanent; ASTM D621 |
| 1.8 - 2.0 % @Temperature 150 °C, Time 86400 sec, Pressure 0.981 MPa | 1.8 - 2.0 % @Temperature 302 °F, Time 24.0 hour, Pressure 142 psi | total | |
| 2.9 - 4.8 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 2.9 - 4.8 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | total; ASTM D621 | |
| 8.0 - 9.0 % @Temperature 150 °C, Time 86400 sec, Pressure 4.90 MPa | 8.0 - 9.0 % @Temperature 302 °F, Time 24.0 hour, Pressure 711 psi | total | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 65 - 68 | 65 - 68 | ASTM D2240 |
| Tensile Strength, Ultimate | 10.8 - 20.6 MPa | 1560 - 2990 psi | ASTM D638 |
| Elongation at Break | 70 - 110 % | 70 - 110 % | ASTM D638 |
| Compressive Strength | 8.34 - 10.8 MPa | 1210 - 1560 psi | 1% Deformation; ASTM D695 |
| Izod Impact, Notched (ISO) | 8.50 - 9.00 kJ/m2 | 4.04 - 4.28 ft-lb/in2 | ASTM D256 |
| Coefficient of Friction | 0.12 | 0.12 | |
| Coefficient of Friction, Static | 0.11 | 0.11 | |
| Limiting Pressure Velocity | 0.003597 - 0.0037605 MPa-m/sec | 102.7 - 107.36 psi-ft/min | 3 m/min |
| 0.0040875 - 0.00654 MPa-m/sec | 116.70 - 187 psi-ft/min | 30 m/min | |
| 0.004905 - 0.0073575 MPa-m/sec | 140.0 - 210.06 psi-ft/min | 300 m/min | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1000 ohm-cm | >= 1000 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.00e+7 ohm | >= 1.00e+7 ohm | 50% rel. humidity; ASTM D257 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 95.0 - 100 μm/m-°C @Temperature 25.0 - 100 °C | 52.8 - 55.6 μin/in-°F @Temperature 77.0 - 212 °F | ASTM D696 |
| 110 - 120 μm/m-°C @Temperature 25.0 - 200 °C | 61.1 - 66.7 μin/in-°F @Temperature 77.0 - 392 °F | ASTM D696 | |
| 130 - 150 μm/m-°C @Temperature 25.0 - 300 °C | 72.2 - 83.3 μin/in-°F @Temperature 77.0 - 572 °F | ASTM D696 | |
| Thermal Conductivity | 0.628 - 0.711 W/m-K | 4.35 - 4.93 BTU-in/hr-ft2-°F | |
| Maximum Service Temperature, Air | 270 °C | 518 °F | continuous |
| Minimum Service Temperature, Air | -260 °C | -436 °F | |