- 密度 [g/cm3]: 2.15
- 缺口沖擊強度: 14.0
- 彎曲強度 [MPa]: 17.2
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.15 - 2.25 g/cc | 0.0777 - 0.0813 lb/in3 | ASTM D792 |
| Deformation | 2.8 - 3.0 % @Temperature 150 °C, Time 86400 sec, Pressure 0.981 MPa | 2.8 - 3.0 % @Temperature 302 °F, Time 24.0 hour, Pressure 142 psi | total |
| 6.0 - 8.0 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 6.0 - 8.0 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | permanent; ASTM D621 | |
| 11 - 15 % @Temperature 23.0 °C, Time 86400 sec, Pressure 13.7 MPa | 11 - 15 % @Temperature 73.4 °F, Time 24.0 hour, Pressure 1990 psi | total; ASTM D621 | |
| 18 - 19 % @Temperature 150 °C, Time 86400 sec, Pressure 4.90 MPa | 18 - 19 % @Temperature 302 °F, Time 24.0 hour, Pressure 711 psi | total | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 60 - 64 | 60 - 64 | ASTM D2240 |
| Tensile Strength, Ultimate | 17.2 - 25.5 MPa | 2490 - 3700 psi | ASTM D638 |
| Elongation at Break | 250 - 280 % | 250 - 280 % | ASTM D638 |
| Compressive Strength | 5.88 - 6.37 MPa | 853 - 925 psi | 1% Deformation; ASTM D695 |
| Izod Impact, Notched (ISO) | 14.0 - 15.5 kJ/m2 | 6.66 - 7.38 ft-lb/in2 | ASTM D256 |
| Coefficient of Friction | 0.060 | 0.060 | |
| Coefficient of Friction, Static | 0.050 | 0.050 | |
| Limiting Pressure Velocity | 0.0034335 - 0.00351525 MPa-m/sec | 98.026 - 100.360 psi-ft/min | 3 m/min |
| 0.0040875 - 0.0044145 MPa-m/sec | 116.70 - 126.03 psi-ft/min | 30 m/min | |
| 0.0050685 - 0.005232 MPa-m/sec | 144.71 - 149.4 psi-ft/min | 300 m/min | |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | ASTM D257 |
| Surface Resistance | >= 1.00e+15 ohm | >= 1.00e+15 ohm | 50% rel. humidity; ASTM D257 |
| Dielectric Constant | 2.3 - 2.5 @Frequency 50.0 - 1.00e+7 Hz | 2.3 - 2.5 @Frequency 50.0 - 1.00e+7 Hz | ASTM D150 |
| Dielectric Strength | 16.0 - 19.0 kV/mm @Thickness 0.100 mm | 406 - 483 kV/in @Thickness 0.00394 in | short term; ASTM D149 |
| Dielectric Loss Index | 0.00075 @Frequency 50.0 Hz | 0.00075 @Frequency 50.0 Hz | dry |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 90.0 - 160 μm/m-°C @Temperature 25.0 - 200 °C | 50.0 - 88.9 μin/in-°F @Temperature 77.0 - 392 °F | ASTM D696 |
| 120 - 145 μm/m-°C @Temperature 25.0 - 100 °C | 66.7 - 80.6 μin/in-°F @Temperature 77.0 - 212 °F | ASTM D696 | |
| 150 - 180 μm/m-°C @Temperature 25.0 - 300 °C | 83.3 - 100 μin/in-°F @Temperature 77.0 - 572 °F | ASTM D696 | |
| Thermal Conductivity | 0.335 - 0.377 W/m-K | 2.32 - 2.61 BTU-in/hr-ft2-°F | |
| Maximum Service Temperature, Air | 270 °C | 518 °F | continuous |
| Minimum Service Temperature, Air | -260 °C | -436 °F | |