- 密度 [g/cm3]: 1.68
- 拉伸強(qiáng)度 [MPa]: 29.6
- 彎曲強(qiáng)度 [MPa]: 53.8
- 彎曲模量 [MPa]: 1.69
- 硬度: 90.0
- 熱變形溫度 [℃]: 90.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.68 g/cc | 0.0607 lb/in3 | ASTM D792 | ||
| Water Absorption | <= 0.10 % | <= 0.10 % | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 90 | 90 | ASTM D785 | ||
| Hardness, Shore D | 71 | 71 | ASTM D785 | ||
| Tensile Strength, Ultimate | 53.8 MPa | 7800 psi | ASTM D638 | ||
| Tensile Strength, Yield | 29.6 MPa | 4300 psi | ASTM D638 | ||
| Elongation at Break | 250 % | 250 % | ASTM D638 | ||
| Flexural Modulus | 1.69 GPa | 245 ksi | ASTM D790 | ||
| Izod Impact, Notched | NB | NB | ASTM D256 | ||
| 1.23 J/cm @Temperature -40.0 °C | 2.30 ft-lb/in @Temperature -40.0 °F | ASTM D256 | |||
| Taber Abrasion, mg/1000 Cycles | 0.0060 | 0.0060 | ASTM D1044 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 101 μm/m-°C @Temperature 20.0 °C | 56.0 μin/in-°F @Temperature 68.0 °F | ASTM D696 | ||
| Maximum Service Temperature, Air | 149 °C | 300 °F | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 90.0 °C | 194 °F | ASTM D648 | ||
| Oxygen Index | >= 52 % | >= 52 % | ASTM D863 | ||
| Descriptive Properties | |||||
| Biofilm Buildup | 1 | CDI | |||
| Factory Mutual | 4910 Listed | File #4D7Q9.AM | |||
| Mean Roughness | 0.15 | SDI | |||
| Notch Sensitivity | Not Sensitive | ||||