国产亚洲精品在天天在线麻豆,国产精品人妻在线观看,91超碰在线精品,亚洲国产精品成人一区二区在线,人妻精品动漫h无码

SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific)

SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific) 物性表: SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific)物性表及特性介紹,SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific)注塑參數詳情,如需SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific)下載, 可到相關下載區下載

熔體流動速率 [g/10min]: 4.1
密度 [g/cm3]: 1.2
缺口沖擊強度: 2.67
拉伸強度 [MPa]: 55.0
斷裂伸長率 [%]: 70.0
彎曲模量 [MPa]: 2.15
熱變形溫度 [℃]: 120.0

Physical Properties	Metric	English	Comments

Specific Gravity	1.24 g/cc	1.24 g/cc	ASTM D 792
Density	1.20 g/cc	0.0434 lb/in3	ISO 1183
Linear Mold Shrinkage, Flow	0.0070 - 0.0090 cm/cm @Thickness 3.20 mm	0.0070 - 0.0090 in/in @Thickness 0.126 in	SABIC Method
Linear Mold Shrinkage, Transverse	0.0070 - 0.0090 cm/cm @Thickness 3.20 mm	0.0070 - 0.0090 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	4.1 g/10 min @Load 5.00 kg, Temperature 250 °C	4.1 g/10 min @Load 11.0 lb, Temperature 482 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	56.0 MPa	8120 psi	50 mm/min; ISO 527
	61.0 MPa	8850 psi	Type I, 50 mm/min; ASTM D 638
Tensile Strength, Yield	55.0 MPa	7980 psi	50 mm/min; ISO 527
	61.0 MPa	8850 psi	Type I, 50 mm/min; ASTM D 638
Elongation at Break	120 %	120 %	Type I, 50 mm/min; ASTM D 638
	120 %	120 %	50 mm/min; ISO 527
Elongation at Yield	4.5 %	4.5 %	50 mm/min; ISO 527
	5.2 %	5.2 %	Type I, 50 mm/min; ASTM D 638
Tensile Modulus	2.48 GPa	360 ksi	50 mm/min; ASTM D 638
Flexural Yield Strength	70.0 MPa	10200 psi	2 mm/min; ISO 178
	99.0 MPa	14400 psi	1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus	2.15 GPa	312 ksi	2 mm/min; ISO 178
	2.48 GPa	360 ksi	1.3 mm/min, 50 mm span; ASTM D 790
Izod Impact, Notched	2.67 J/cm @Temperature -30.0 °C	5.00 ft-lb/in @Temperature -22.0 °F	ASTM D 256
	8.00 J/cm @Temperature 23.0 °C	15.0 ft-lb/in @Temperature 73.4 °F	ASTM D 256
Izod Impact, Notched (ISO)	20.0 kJ/m2 @Temperature -30.0 °C	9.52 ft-lb/in2 @Temperature -22.0 °F	80104; ISO 180/1A
	50.0 kJ/m2 @Temperature 23.0 °C	23.8 ft-lb/in2 @Temperature 73.4 °F	80104; ISO 180/1A
Charpy Impact, Notched	6.00 J/cm2 @Temperature 23.0 °C	28.6 ft-lb/in2 @Temperature 73.4 °F	V-notch Edgew 80104 sp=62mm; ISO 179/1eA
Impact Test	54.0 J @Temperature 23.0 °C	39.8 ft-lb @Temperature 73.4 °F	Instrumented Impact Total Energy; ASTM D 3763

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	69.0 μm/m-°C @Temperature -40.0 - 40.0 °C	38.3 μin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	69.0 μm/m-°C @Temperature -40.0 - 40.0 °C	38.3 μin/in-°F @Temperature -40.0 - 104 °F	ISO 11359-2
CTE, linear, Transverse to Flow	74.0 μm/m-°C @Temperature -40.0 - 40.0 °C	41.1 μin/in-°F @Temperature -40.0 - 104 °F	ASTM E 831
	74.0 μm/m-°C @Temperature -40.0 - 40.0 °C	41.1 μin/in-°F @Temperature -40.0 - 104 °F	ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi)	120 °C @Thickness 3.20 mm	248 °F @Thickness 0.126 in	unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi)	95.0 °C	203 °F	Flatw 80104 sp=64mm; ISO 75/Af
	98.0 °C @Thickness 3.20 mm	208 °F @Thickness 0.126 in	unannealed; ASTM D 648
Vicat Softening Point	130 °C	266 °F	Rate B/50; ASTM D 1525
	130 °C	266 °F	Rate B/50; ISO 306
	132 °C	270 °F	Rate B/120; ISO 306

關鍵詞:
PET
供應
SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/yuanliaoku/show-39499.html

免責聲明: 本文 SABIC Innovative Plastics Xenoy X5600WX PC+POLYESTER (Asia Pacific) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡

該類別其他物性信息